Please help! My electra glide wont start
#11
Finally! Well thank you guys for trying to help me and your criticism lol But... i finally found and fixed the problem. My solenoid trigger wire going into the coil was shorted out on the case preventing the current to flow through the coil as it should to create the electro magnet. It was reading .2 ohms to ground. i took the solenoid apart, pulled the coil out, put some heat shrink on the spot hitting the case and re-installed it all. Now its reading a more proper 1.5 ohms and it works like new everytime now!
Thread
Thread Starter
Forum
Replies
Last Post
Brewdude2
Sportster Models
4
02-28-2016 01:51 PM