Barely made it home with primary banging like crazy!
#21
02-16-2012 | 08:45 PM
Thread Starter
|
Road Captain
Joined: Oct 2009
Posts: 666
Likes: 5
From: Bay Area, CA
But ... I'm pretty certain that's not it because a few days prior I now remember hearing a couple of faint clunks, but dismissed it thinking it was the brakes which have a tendency to that. Even so, it stuck in the back of my mind.
Either way ... good idea to start with the pulley before getting into the primary.
Thanks,
Murph
#23
02-16-2012 | 09:15 PM
Road Master
Joined: Jun 2011
Posts: 973
Likes: 12
From: Chesapeake Virginia
You must be clairvoyant ... I did adjust the belt tension to within spec last night while I had the bike up the lift.
But ... I'm pretty certain that's not it because a few days prior I now remember hearing a couple of faint clunks, but dismissed it thinking it was the brakes which have a tendency to that. Even so, it stuck in the back of my mind.
Either way ... good idea to start with the pulley before getting into the primary.
Thanks,
Murph
But ... I'm pretty certain that's not it because a few days prior I now remember hearing a couple of faint clunks, but dismissed it thinking it was the brakes which have a tendency to that. Even so, it stuck in the back of my mind.
Either way ... good idea to start with the pulley before getting into the primary.
Thanks,
Murph
#25
02-17-2012 | 05:39 PM
Tourer
Joined: May 2007
Posts: 496
Likes: 4
From: CT
You must be clairvoyant ... I did adjust the belt tension to within spec last night while I had the bike up the lift.
But ... I'm pretty certain that's not it because a few days prior I now remember hearing a couple of faint clunks, but dismissed it thinking it was the brakes which have a tendency to that. Even so, it stuck in the back of my mind.
Either way ... good idea to start with the pulley before getting into the primary.
Thanks,
Murph
But ... I'm pretty certain that's not it because a few days prior I now remember hearing a couple of faint clunks, but dismissed it thinking it was the brakes which have a tendency to that. Even so, it stuck in the back of my mind.
Either way ... good idea to start with the pulley before getting into the primary.
Thanks,
Murph
the only reason i would suggest it, because it happened to me
!!...but let us know what happened!!!
