Mustang backrest 79610 - question
#1
12-26-2011 | 12:05 PM
Thread Starter
|
Seasoned HDF Member
Joined: Sep 2009
Posts: 16,667
Likes: 5,634
From: SE Michigan
Mustang backrest 79610 - question
Folks, Mustang says this backrest is good for 2009-2012 FL touring. I have a 2012 FLHRC. I got it from an eBay seller, I believe.
On the bike, there is no bolt, or hole for the part where the arrow points. No problem for the back two bolts, but if I just bolt it up like that, the front part just floats, that does not seem right.
Am I missing a piece that goes across that the middle part bolts to? Anyone else have this backrest on their bike?
Acutally might have just answered my own question, it looks like I'm missing a cross member piece: http://www.mustangseats.com/docs/200...0DBR%20kit.pdf
On the bike, there is no bolt, or hole for the part where the arrow points. No problem for the back two bolts, but if I just bolt it up like that, the front part just floats, that does not seem right.
Am I missing a piece that goes across that the middle part bolts to? Anyone else have this backrest on their bike?
Acutally might have just answered my own question, it looks like I'm missing a cross member piece: http://www.mustangseats.com/docs/200...0DBR%20kit.pdf
Last edited by Keithhu; 12-26-2011 at 12:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
