I just happen to be looking for a flush mounted axle for my FLHX.
After reviewing the Klock werks model on their website, I called them to ask what the left side looks like because they only show the right side of the bike. The gentleman told me it is the same on both sides. I couldn't get my head around how this is installed so I asked him to e-mail me some pictures and the installation instructions, so I could understand the product better.

On the bottom of the first page, in fine print, it states that these are for installation on show bikes only, and that they are not DOT approved for street use!

WTF?

I don't see these discalimers noted anywhere in their, or any other catalogue that sells them. One has to buy them first to find this out when installing them?

 

You realize that link I sent had them for $85. Cap and axle. Oh well, maybe it isn't the look your after.....have a good holiday

 

Bell>> the axle kit is $85, the bottom fork cap is $50, they do not come together, they are separate items hence the $135 best price i've found so far.
Thanks anyway, appreciated

 

I've been sending out the 08-12 chrome axles and BAH chrome fork cap shipped USPS Priority for $155.00 and the 00-07 package has been going for $130.00.

 

Next up is the tapered wheel spacers for the non ABS bikes. That should complete the front end!

 

http://www.nativecustombaggers.com/i...rome-ends.html this is what i have....$50

 

http://www.nativecustombaggers.com/i...-ends-102.html for the newer bikes

 

I get the "flush" look, but it never appealed to me because of the horizontal casting of the lower leg just above the axle, and the nuts of the axle holder on the right side; so, I opted for the "clamshell" chrome option offered by HD:

http://

Carl

 

Really like the looks, but thanks for the heads up on 'show bike' only. I don't have a show bike.