Northeastconfederate,

I have no desire to change the front pulley unnecessarily! I was trying to visualize how the pulley's would stay aligned? I assume the rear pulley with the narrower cog is shorter from the inside and the outside flange is in the same alignment as the 1 1/2" rear pulley?

Anyway, just glad it will work!

Thank you for your reply!

 

The front pulley is much wider than the rear one. The rear narrow pulley is spaced a little further away from the wheel than the wide pulley, but the belt realigns itself. So as Eric above says, you will be fine!

 

grbrown,

Thank you again for your help!

 

My pleasure! Best of luck and let us know how you get on.