Rockford Fosgate PBR300X4 amp install
#22
I have installed two of the pbr 300x4 on my 09 Road Glide. Using the amps to push 4 Rockford Power series 6.5's and a set of Rockford Power series 6x9's in a set of cycle sound lids. this combination is unbelievable!
For the money the PBR300 and Power series speakers are the way to go. I had a hawg wired system and it didn't compare to the rockford.
For the money the PBR300 and Power series speakers are the way to go. I had a hawg wired system and it didn't compare to the rockford.
I am currently running 8 speakers:
4 PIONEER 6 X 9's
2 Boston Accoustic 6 3/4 components
2 Rockford Fosgate 5 1/4
All powered by 2 Alpine 4.150 amps. 1200 watts of power
But,..........seriously thinking about adding 2 speakers to the lower fairings.
But then I'd need 2 more channels to power them, unless I parallel them with the 5 1/4's..........
What to do, what to do .................................
#23
Parallel them. There not subs so there shouldn't be a problem with overheating.
One question.. To wire the speakers and run the postive to the battery, ground to the chassis, remote to a 12v key switch(if there is a remote) is self explanitory. My question is, is there RCA's to plug in to the HK radio or sumn else that sends the sound signal? Thanks!
One question.. To wire the speakers and run the postive to the battery, ground to the chassis, remote to a 12v key switch(if there is a remote) is self explanitory. My question is, is there RCA's to plug in to the HK radio or sumn else that sends the sound signal? Thanks!
#24
Parallel them. There not subs so there shouldn't be a problem with overheating.
One question.. To wire the speakers and run the postive to the battery, ground to the chassis, remote to a 12v key switch(if there is a remote) is self explanitory. My question is, is there RCA's to plug in to the HK radio or sumn else that sends the sound signal? Thanks!
One question.. To wire the speakers and run the postive to the battery, ground to the chassis, remote to a 12v key switch(if there is a remote) is self explanitory. My question is, is there RCA's to plug in to the HK radio or sumn else that sends the sound signal? Thanks!
#25
I just installed a Rockford 4 ch. amp at the end of this summer. I'm running a pair of Hertz Titan 6.5 in the fairing and they are 3 Ohms and a set of 6x9 Polk Audio 4 Ohms in the saddlebag lids. No problems so far and sounds great, I feel it's a better bang for your dollar than the ARC 125.2 amp which I also ran before.
#26
I have installed two of the pbr 300x4 on my 09 Road Glide. Using the amps to push 4 Rockford Power series 6.5's and a set of Rockford Power series 6x9's in a set of cycle sound lids. this combination is unbelievable!
For the money the PBR300 and Power series speakers are the way to go. I had a hawg wired system and it didn't compare to the rockford.
For the money the PBR300 and Power series speakers are the way to go. I had a hawg wired system and it didn't compare to the rockford.
#27
and amp
I just installed a Rockford 4 ch. amp at the end of this summer. I'm running a pair of Hertz Titan 6.5 in the fairing and they are 3 Ohms and a set of 6x9 Polk Audio 4 Ohms in the saddlebag lids. No problems so far and sounds great, I feel it's a better bang for your dollar than the ARC 125.2 amp which I also ran before.
#28
Where are the best Prices?
I am ready to buy after much research, reading here and there. I am going for the Rockford Fos PBR 300 and the 6.5 Hertz speakers. The only thing I don't know is where the best price is gonna be. I know I need a amp install kit and speaker adapters. Relocate Mr CB and I'm off. Any ideas?
#29
I am ready to buy after much research, reading here and there. I am going for the Rockford Fos PBR 300 and the 6.5 Hertz speakers. The only thing I don't know is where the best price is gonna be. I know I need a amp install kit and speaker adapters. Relocate Mr CB and I'm off. Any ideas?