Roadking Heritage "Style" bars vs Heritage Bars
#1
Roadking Heritage "Style" bars vs Heritage Bars
I've got an 08 Roadking & wasn't happy with the stock bars so I tried the Heritage "Style" bars, wasn't happy with the wrist angle & then tried the Heritage Softail bars & BAM....These were the ticket!
Since then, I've had a couple of members pm me about my bars. I figured a picture was worth a thousand words so here's a picture showing the difference between the two of them.
Clay
Since then, I've had a couple of members pm me about my bars. I figured a picture was worth a thousand words so here's a picture showing the difference between the two of them.
Clay
#2
I've got an 08 Roadking & wasn't happy with the stock bars so I tried the Heritage "Style" bars, wasn't happy with the wrist angle & then tried the Heritage Softail bars & BAM....These were the ticket!
Since then, I've had a couple of members pm me about my bars. I figured a picture was worth a thousand words so here's a picture showing the difference between the two of them.
Clay
Since then, I've had a couple of members pm me about my bars. I figured a picture was worth a thousand words so here's a picture showing the difference between the two of them.
Clay
#3
I've got an 08 Roadking & wasn't happy with the stock bars so I tried the Heritage "Style" bars, wasn't happy with the wrist angle & then tried the Heritage Softail bars & BAM....These were the ticket!
Since then, I've had a couple of members pm me about my bars. I figured a picture was worth a thousand words so here's a picture showing the difference between the two of them.
Clay
Since then, I've had a couple of members pm me about my bars. I figured a picture was worth a thousand words so here's a picture showing the difference between the two of them.
Clay
#4
#5
The Softail Heritage bars are the ones still in the plastic. On the RK Heritage style bars you'll notice the goofy angle on the ends of the bars. That's the part that hurt my wrist. The Softail Heritage bars are HD Part #56569-09 for the 09-11 Heritage Softail. These do require some modding for the tbw but it's pretty simple & well worth the extra work.
#7
Trending Topics
#9
So far these heritage softtail bars are the best mod for me so far. Someday I will go the 12 or 14 inch wild one route but for the cost these have been the ticket. The modification took my friend about 30 minutes as he was going slow so as not to screw it up although he did break a bit on his lathe. Had to ditch the clutch cable guide to create enough slack but all is good. I liked the heritage style bars but the wrist angle on these is a lot better IMHO.
#10
For the tbw you have to do the following.
a) Cut (3) notches in the end of the right handlebar for the tbw assemble to attach into the bars.
b) You have to drill a hole in the bottom of the bars to create a means of getting the tbw out of the bars.
It's a simple mod & you can use your stock bars as a template to see what you need. Very simple mod & I believe Zanottis list the bars for like $51 + shipping....Unless your wanting beach bars or Wild One Apes, for under $70 & 30 minutes of labor you can't go wrong. BTW, these are the equivalent of baby apes with around 13" of rise.
a) Cut (3) notches in the end of the right handlebar for the tbw assemble to attach into the bars.
b) You have to drill a hole in the bottom of the bars to create a means of getting the tbw out of the bars.
It's a simple mod & you can use your stock bars as a template to see what you need. Very simple mod & I believe Zanottis list the bars for like $51 + shipping....Unless your wanting beach bars or Wild One Apes, for under $70 & 30 minutes of labor you can't go wrong. BTW, these are the equivalent of baby apes with around 13" of rise.