projector headlight retro fit
#21
#23
Join Date: Oct 2006
Location: South Jersey, AC area
Posts: 1,331
Likes: 0
Received 4 Likes
on
4 Posts
I just went into the garage and took a look at my headlight assemblies..
the Morimoto mini needs about 4 1/2" mounting depth inside the headlamp housing, we may have enough room inside the housing BUT...... there is one issue that will interfere with the operation of the projector..
there is a black Harley emblem right in the center of the lens of headlamp housing! LOL!
that emblem will have to be removed for the projector to work properly..
the Morimoto mini needs about 4 1/2" mounting depth inside the headlamp housing, we may have enough room inside the housing BUT...... there is one issue that will interfere with the operation of the projector..
there is a black Harley emblem right in the center of the lens of headlamp housing! LOL!
that emblem will have to be removed for the projector to work properly..
#26
thats not a big issue, heat up the headlight and pry the lens art . i have done i have done it on a few car head lights as well as a motorcycle healight. i use a heat gun, or hair dryer. work slowly and its a breeze
#27
I just went into the garage and took a look at my headlight assemblies..
the Morimoto mini needs about 4 1/2" mounting depth inside the headlamp housing, we may have enough room inside the housing BUT...... there is one issue that will interfere with the operation of the projector..
there is a black Harley emblem right in the center of the lens of headlamp housing! LOL!
that emblem will have to be removed for the projector to work properly..
the Morimoto mini needs about 4 1/2" mounting depth inside the headlamp housing, we may have enough room inside the housing BUT...... there is one issue that will interfere with the operation of the projector..
there is a black Harley emblem right in the center of the lens of headlamp housing! LOL!
that emblem will have to be removed for the projector to work properly..
#28
Join Date: Oct 2006
Location: South Jersey, AC area
Posts: 1,331
Likes: 0
Received 4 Likes
on
4 Posts
This projector is 3.2" long and also has high/ low beam.... costs $160.00 for a pair with angel eyes and demon eyes! good deal!
http://eshop.ktautopart.com/motorcyc...FYTt7Qod9mPelQ
http://eshop.ktautopart.com/motorcyc...FYTt7Qod9mPelQ
Last edited by Deuce Bigelow; 10-21-2011 at 07:32 AM.
#29
Join Date: Oct 2006
Location: South Jersey, AC area
Posts: 1,331
Likes: 0
Received 4 Likes
on
4 Posts
This projector is 3.2" long and also has high/ low beam.... costs $160.00/ pair complete with ballasts, angel eyes and demon eyes! good deal!
http://eshop.ktautopart.com/motorcyc...FYTt7Qod9mPelQ
http://eshop.ktautopart.com/motorcyc...FYTt7Qod9mPelQ
Last edited by Deuce Bigelow; 10-21-2011 at 07:33 AM.