I am looking for an aftermarket highway peg mount for my 2007 Road King Custom. I have removed the stock case guard/crashbar and do not intend to run with one. What are my options. I just bought a brand new Kuryakyn Cruise Arm Mark III and they absoloutely will not fit on my floorboards. Thanks in advance.

 

You can get one of those adjustable mustache highway peg mount bars that mount to the downtubes with clamps. It's just a bar that goes across. Kuryakyn has them, Rivco and some others.

Edit: Here's the one from Rivco

 

to the top

 

Ok how about this:

Does any company out there sell a highway peg mount that bolts to the lower bolt holes in the frame where the factory crash bar was located as I have taken it off the bike?

 

or you could switch from the streamliner footboards to the other style....

 

I am running IMT's Jacknife highway pegs.. They work great.. I hear Kuryakin is coming out with some floorboards that have a jacknife style peg as well...

http://www.imtnebraska.com/products/index.html

 

RIVCO Products has HD002 for 1 1/8" bar, HD003 for 1 1/4" bar, HD004 for 1 1/2" bar. These highway mounts mount on the frame downtubes, on a Harley I recomend getting an extension as well part number PEGSEXT / 2", or PEGSEXT-3 for 3" extension. I have the HD004 on my 2006 Street Bob with the PEGSEXT-3 extensions, I turn the rubber pads facing upward so I can rest the back of my ankles on them and let the wind go up my pant leg to keep cool in the summer.