Spark Plug Heat Ranges
#1
Spark Plug Heat Ranges
Shipped my bike back to the states a couple months ago. Should be receiving it in another 3 weeks. Looking to change all my fluids and give a good going through before I get out to do some riding on some good American roads (assuming the bike shows up in one piece).
Spark plugs are on my list of things to change, I have been using the OEM plugs (slight pinging), but I was thinking about a plug in a colder heat range. I went down 2 steps on my Dodge Ram, seemed to make the pinging go away, would this work with our bikes also?
Thanks,
Cale
Spark plugs are on my list of things to change, I have been using the OEM plugs (slight pinging), but I was thinking about a plug in a colder heat range. I went down 2 steps on my Dodge Ram, seemed to make the pinging go away, would this work with our bikes also?
Thanks,
Cale
#3
Spark plug types, heat ranges, manufacturers, stock vs gold, copper & platinum...etc, has been debated as much as which oil to use or which is better.
Generally, the "experts" agree that HD OEM plugs are too hot to start with & blaming EPA requirements seems to be the common reasoning. For an average stock to mildly modified HD street motor, a common practice is to go one range cooler & thats what I do. However, many will state differently & for various reasons & each will have valid points to support their reasoning.
It wont hurt anything to go 1-2 ranges cooler in a HD motor & in most cases there will be some improvement & others no noticeable improvement. In most cases only a comparative test on a dyno can see the difference, if there is one.
Heres a decent informative page to read: http://www.centuryperformance.com/sp...ch-spg-26.html
There are volumns of information on the net written on spark plugs.
Its best to be educated on heat ranges & decide for yourself.
Generally, the "experts" agree that HD OEM plugs are too hot to start with & blaming EPA requirements seems to be the common reasoning. For an average stock to mildly modified HD street motor, a common practice is to go one range cooler & thats what I do. However, many will state differently & for various reasons & each will have valid points to support their reasoning.
It wont hurt anything to go 1-2 ranges cooler in a HD motor & in most cases there will be some improvement & others no noticeable improvement. In most cases only a comparative test on a dyno can see the difference, if there is one.
Heres a decent informative page to read: http://www.centuryperformance.com/sp...ch-spg-26.html
There are volumns of information on the net written on spark plugs.
Its best to be educated on heat ranges & decide for yourself.
#4
I switched to a NGK Iridium IX Plug purely on the recomendation from a guy who does a boat load of dyno work. I played around with plugs on an S&S 107" motor, NGK being one and not sure anything got any better. Actually ended up putting the standard Champions back in.
I'm going to run these Iridium plugs in this 2011 twin cam for a while and see if they make a difference over time, but if I've improved anything at all, at this time I'm not feeling it.
I'm going to run these Iridium plugs in this 2011 twin cam for a while and see if they make a difference over time, but if I've improved anything at all, at this time I'm not feeling it.
#5
Yeah, the bike pinged, mostly under load climbing through the mountains. Fuel Moto has been great over the last year or so, helping me out with MAPS. The fuel we run here is actually 95 octane (AGIP or ESSO), so it should be good to go. I have changed to the SE Plug Wires and the $3 HD Gold plugs. I really cannot complain about the back, had more problems with my Honda when I got here, then with the HD, so I am a happy camper.
#6
Spark plug types, heat ranges, manufacturers, stock vs gold, copper & platinum...etc, has been debated as much as which oil to use or which is better.
Generally, the "experts" agree that HD OEM plugs are too hot to start with & blaming EPA requirements seems to be the common reasoning. For an average stock to mildly modified HD street motor, a common practice is to go one range cooler & thats what I do. However, many will state differently & for various reasons & each will have valid points to support their reasoning.
It wont hurt anything to go 1-2 ranges cooler in a HD motor & in most cases there will be some improvement & others no noticeable improvement. In most cases only a comparative test on a dyno can see the difference, if there is one.
Heres a decent informative page to read: http://www.centuryperformance.com/sp...ch-spg-26.html
There are volumns of information on the net written on spark plugs.
Its best to be educated on heat ranges & decide for yourself.
Generally, the "experts" agree that HD OEM plugs are too hot to start with & blaming EPA requirements seems to be the common reasoning. For an average stock to mildly modified HD street motor, a common practice is to go one range cooler & thats what I do. However, many will state differently & for various reasons & each will have valid points to support their reasoning.
It wont hurt anything to go 1-2 ranges cooler in a HD motor & in most cases there will be some improvement & others no noticeable improvement. In most cases only a comparative test on a dyno can see the difference, if there is one.
Heres a decent informative page to read: http://www.centuryperformance.com/sp...ch-spg-26.html
There are volumns of information on the net written on spark plugs.
Its best to be educated on heat ranges & decide for yourself.
Cale
#7
I'm currently doing a spark plug heat range experiment, no results to post yet. Using stock HD 6R12, colder Autolite 4163, and even colder VROD HD 10R12. I am considering a theory though; colder heat range plugs remove heat from plug tip faster to mitigate the hot spot and prevent preigntion, but the heat conducts out through the head, so does a colder plug actually raise CHTs and thereby oil temps? Will post something soon as I can.
Trending Topics
#8
I'm currently doing a spark plug heat range experiment, no results to post yet. Using stock HD 6R12, colder Autolite 4163, and even colder VROD HD 10R12. I am considering a theory though; colder heat range plugs remove heat from plug tip faster to mitigate the hot spot and prevent preigntion, but the heat conducts out through the head, so does a colder plug actually raise CHTs and thereby oil temps? Will post something soon as I can.
Another comment was that a bad tune is most likely one culprit. I have FM MAPS, I know every bike is not the same, but I feel confident I have a good tune.
I will wait for some info from you, plus I will ride the bike in the states for a little while. There could be a difference in formulation of the gas between Europe and the US.
Cale
#9
Spark plug types, heat ranges, manufacturers, stock vs gold, copper & platinum...etc, has been debated as much as which oil to use or which is better.
Generally, the "experts" agree that HD OEM plugs are too hot to start with & blaming EPA requirements seems to be the common reasoning. For an average stock to mildly modified HD street motor, a common practice is to go one range cooler & thats what I do. However, many will state differently & for various reasons & each will have valid points to support their reasoning.
It wont hurt anything to go 1-2 ranges cooler in a HD motor & in most cases there will be some improvement & others no noticeable improvement. In most cases only a comparative test on a dyno can see the difference, if there is one.
Heres a decent informative page to read: http://www.centuryperformance.com/sp...ch-spg-26.html
There are volumns of information on the net written on spark plugs.
Its best to be educated on heat ranges & decide for yourself.
Generally, the "experts" agree that HD OEM plugs are too hot to start with & blaming EPA requirements seems to be the common reasoning. For an average stock to mildly modified HD street motor, a common practice is to go one range cooler & thats what I do. However, many will state differently & for various reasons & each will have valid points to support their reasoning.
It wont hurt anything to go 1-2 ranges cooler in a HD motor & in most cases there will be some improvement & others no noticeable improvement. In most cases only a comparative test on a dyno can see the difference, if there is one.
Heres a decent informative page to read: http://www.centuryperformance.com/sp...ch-spg-26.html
There are volumns of information on the net written on spark plugs.
Its best to be educated on heat ranges & decide for yourself.