Handlebar install
#11
The WO577's are the bars I'm looking at purchasing, but I can't seem to get a straight answer out of any dealers as far as cable lenghts or wire extensions goes. If you don't mind my asking, what did is needed? I now understand the wires can be re-routed, what about the cables?
Thanks for your help and I didn't intend to hijack the thread.
Ride safe!
Thanks for your help and I didn't intend to hijack the thread.
Ride safe!
I would recommend giving him a call, he can provide the entire parts list! Makes it real easy.
Mike
#12
IIRC....the cables were +8. If you can't get a straight answer form someone you are spending ~$600 with, find a new dealer! I have bought a couple sets of bars/cables from Johnny Vaughn at www.hdbikeparts.com
I would recommend giving him a call, he can provide the entire parts list! Makes it real easy.
Mike
I would recommend giving him a call, he can provide the entire parts list! Makes it real easy.
Mike
#14
IIRC....the cables were +8. If you can't get a straight answer form someone you are spending ~$600 with, find a new dealer! I have bought a couple sets of bars/cables from Johnny Vaughn at www.hdbikeparts.com
I would recommend giving him a call, he can provide the entire parts list! Makes it real easy.
Mike
I would recommend giving him a call, he can provide the entire parts list! Makes it real easy.
Mike
#15
Well it is coming along nicely. I have both sides wired, waiting for the 12" extensions to arrive to finish up under the fairing. Bars are tight and all controls are back on. New +4 clutch cable from magnum shielding...BITCHIN'...installed today. I did sit on it today to see how it would feel and it hard to tell, but I am sure it will be freaking awesome when done. Should probably get to ride by early in the week if the weather cools down a bit. It was 106 today. Later.
#16
Well it is coming along nicely. I have both sides wired, waiting for the 12" extensions to arrive to finish up under the fairing. Bars are tight and all controls are back on. New +4 clutch cable from magnum shielding...BITCHIN'...installed today. I did sit on it today to see how it would feel and it hard to tell, but I am sure it will be freaking awesome when done. Should probably get to ride by early in the week if the weather cools down a bit. It was 106 today. Later.
#17
The brake line will stay stock for the time being. I wanted to do the whole system in braided but just couldn't pull it off right now...FIXED INCOME...ha!ha! I figureon getting the brake lines all at once and take that on as another project. The stock fit fine with no issues at all with the 575s.
Thread
Thread Starter
Forum
Replies
Last Post