Has anyone had good luck using the PC III with the MM fuel injection? Thinking of doing a stage 1 on my 01 Ultra. I already have a set of SE slip ons to put on. What's involved in converting air breather into a high flow. Was thinking of having Jamie from fuel moto set me up with the PC. Didn't know how well they work with the older style fuel injection.

 

I use a Ness Big Sucker for the air intake side. As far as a PCIII. that's what I use, no probs.

I used a canned map from Fuelmoto, then took the bike there and had Jamie do a true tune. I recommend FM highly.

 

Quickie,

I have a PCIII on my 2000 RKC. I sent Jamie the specs of my build (95 and cam) and he fixed me up. Others can chime in, but with just a Stage 1 breather change, I doubt you'll need the PCIII.

 

They work very well with MM, but you need a good tuner. No experience with FM, but most here speak highly of him.

 

I've had the PCIII on my 01 with the MM injection for 4 years. First one fried last year and replaced it with a new one. Bike runs strong with it. Tried an FI2000 on it before going with anothe PCIII and was a noticeable difference it acceleration when i put the PCIII back on.

 

Have one on my 01 EGC no problems. Gave FM all my specs they put the map in. I hooked it up took it for a loooonnnngggg ride on the hwy and on a 70 mountain run. No problems at all.