Just had my scooter dynoed, picked up 6hp at 72 hp total and torque at 83.7. Mike at Revolution Speed and Custom here in Marietta,Ga did an awesome job. Was running too rich and he corrected this, runs liken a new bike. The painter's name is Jeff and he also painted 2 of my bikes. Stop in if you are ever in town.


Screamin Eagle air filter
Rinehart headers w/ sampson tapered slipons
PC 3


Later

 

Good deal! A tuner that knows what he's doing can make all the difference in the world....

Congrats!

 

Where is it at, im near marietta.

 

Always great to hear about a quality PCIII dyno tune.....does make a major difference!

 

They are located in Marietta,Ga off of 41 near the corner of Bells Ferry Road and 41. Their no. is 770-420-9191.


Have a nice day !

 

Ok since we are talking dyno's, how much is a good dyno tune going to cost me? I'm planning my exhaust, intake and PCIII purchase for this winter and you all have convinced me to go and get a dyno to make it right. How much should I add in for it? Just ball park of course.

 

Well I spent 250 for the dyno runs, let me clarify, he did 3 runs to make sure each and every time the readings and maps were right and that nothing changes. I will have to get it dynoed again after I put my 95 kit on it. You will see an increase immediately from getting it dynoed. I am doing my hop ups in steps due, so I that is why when its all said and done I will have had to dyno the bike 2 times, but money well spent.

Have a good day !

 

Can you post your dyno run sheet? I am interested in your A/F mixture. I had a disappointing dyno run after the PCIII install. It shows the A/F dead nuts at 13 across the board, runs smooth, no decel popping but only 68/74. I'm wondering if it needs to be leaned out a bit.