What did you do to your bagger today?
#7021
Bars & Mike
Well I installed a new set of Wild one 578 today. First time changing bars on a dresser. It was not very difficult at all and saved a bunch of cash. While it was apart I moved the XM antenna and added the Mike from an extra headset for voice command wired into the non used 280 plug in the fairing no need to buy the $70 cable from HD saved more cash.Everything back together and works. Did i say I saved a bunch of CASH what can I buy next I need to spend some cash and have a beer
#7025
Map Needed 2013 Ulrta Classic with stage 1 air breather and Big Louie Slip-on
I installed stage 1 breather and Big louie slip-on with 3 " baffles. I have a SERT but can't find a map for this setup, any Ideas where I could find one. thanks
#7027
Made a 9/16" "flare socket" for adjusting the passing lamps, and wired them so they'll stay on when the high beams are on.
#7029
Well I installed a new set of Wild one 578 today. First time changing bars on a dresser. It was not very difficult at all and saved a bunch of cash. While it was apart I moved the XM antenna and added the Mike from an extra headset for voice command wired into the non used 280 plug in the fairing no need to buy the $70 cable from HD saved more cash.Everything back together and works. Did i say I saved a bunch of CASH what can I buy next I need to spend some cash and have a beer
#7030
Granted I did this a couple days ago, but I installed a Harley Tall Boy seat, V&H Dresser Duals to go with the V&H Hi-Outputs I had, flashed the ecu with the FP3, and the Tall Boy Cycle's floor board relocation kit. Ape's to come soon.