What did you do to your bagger today?
#5471
The big brown truck brought my EZ up stand and I installed it... Took me longer to read the directions than to actually install the stand. Now I have an easier time walking around the bike in the garage.
#5472
I have a 2014 SG Firefighter Edition and I have been working on adding some items related to my work to the bike. One of the items I wanted to mount was an old school brass fire extinguisher. After some thought and planning I purchased a fork mount for the turn signal relocation and modified it to hold the extinguisher and mounted it to the passenger peg mount. ( I ride solo only) Going to add a decal to it once I figure out what decal i want.
#5474
Installed the Daymaker headlight and Custom Dynamic signals on four corner. Did the LRS light tinted, upgraded the system with the 6.5 amp and speakers. Have some HD lowers on order for my SGS
#5475
Fairing Brackets - Alloy Art
Added a set of Alloy Art strong arm brackets on the old 2002 E.G. I ordered through J&P Cycle as a gold member costing 87 bucks.
Seems like the faring is as tight as the prom queens new shoes....
It is a bit of a challenge to get things lined up correctly but sure feels tighter all around. This is an old police bike and has no radio or amp...Just using the glove box. Apparently with the extra added strength from these you can add more to that "radio area" and it'll hold a heavier amp.
As of to date completed the swing arm overhaul and new drive belt, new rear wheel bearings and rear pulley. Other small items to come as found or needed and the front end too. Coming soon a DD6 and some Fuelmoto engine items. Note: The glove box was not tighten down at the time of the picture.
Seems like the faring is as tight as the prom queens new shoes....
It is a bit of a challenge to get things lined up correctly but sure feels tighter all around. This is an old police bike and has no radio or amp...Just using the glove box. Apparently with the extra added strength from these you can add more to that "radio area" and it'll hold a heavier amp.
As of to date completed the swing arm overhaul and new drive belt, new rear wheel bearings and rear pulley. Other small items to come as found or needed and the front end too. Coming soon a DD6 and some Fuelmoto engine items. Note: The glove box was not tighten down at the time of the picture.
Last edited by Biker John; 03-01-2014 at 07:39 PM. Reason: added tighting and wording
#5479
I installed my Custom Dynamics lights that came in today along with the Sundowner seat. Like it except it feels like it pushes me forward a bit. Does anyone else get that? CD as usual did not disappoint.
#5480
Yep ... forward and up, but I only use it for two-up so it gives the wife a little more room. Her butt sure is happier too.