What did you do to your bagger today?
#4771
09-30-2013, 12:46 AM
Advanced
Join Date: Aug 2013
Location: Westminster, CO
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
I have some of the painted and polished parts, but they're not on the computer yet. I'll get the pics off the camera and post some.
I took the week off to get the parts painted. I spent 9 hours today color sanding and polishing the paint, which is a 10-step process. If you ever wondered why a custom paint job costs so much, I can tell you!
Reassembly will start tomorrow.
I took the week off to get the parts painted. I spent 9 hours today color sanding and polishing the paint, which is a 10-step process. If you ever wondered why a custom paint job costs so much, I can tell you!
Reassembly will start tomorrow.
#4772
09-30-2013, 07:58 AM
finished buttoning up from the LA chopper hb install.
Installed the Kuryakyn bullet signals/license plate holder and smoke laydown taillight lens,
then installed the tourpak detach kit. I have some molex connectors on the way to customize the harness to relieve the need to roll up a bunch of wire under the seat.
Now to find a seat that looks good without the pak on...been watching for a nice oem SG seat or a good after market solo...
I also took some rubbing compound and the buffer to the fairing to get out some swirl marks left by the PO.
Installed the Kuryakyn bullet signals/license plate holder and smoke laydown taillight lens,
then installed the tourpak detach kit. I have some molex connectors on the way to customize the harness to relieve the need to roll up a bunch of wire under the seat.
Now to find a seat that looks good without the pak on...been watching for a nice oem SG seat or a good after market solo...
I also took some rubbing compound and the buffer to the fairing to get out some swirl marks left by the PO.
#4773
09-30-2013, 01:01 PM
Road Master
Join Date: Sep 2010
Location: U.S.A.
Posts: 1,196
Likes: 0
Received 0 Likes
on
0 Posts
Over the weekend:
Black 14" LA Choppers Twin Peaks installed.
Truck Lite Phase 7 Headlight installed w/ Chrome Frenched Trim-ring.
Black 14" LA Choppers Twin Peaks installed.
Truck Lite Phase 7 Headlight installed w/ Chrome Frenched Trim-ring.
#4775
09-30-2013, 05:19 PM
Just installed a set of Bobby's FULL METAL JACKET tour pack bushings on my 03 EG. They were a perfect fit and there's little doubt they will outlast the stock plastic pieces from HD. The slop and rattles that I have been chasing are pretty much gone. Bobby was a delight to work with and responded quickly to a few questions I had.
If you're having problems with the old plastic bushings on your tour pack I suggest you check out these bushings at:
http://pwp.att.net/p/s/community.dll...eid=310456&ck=
If you're having problems with the old plastic bushings on your tour pack I suggest you check out these bushings at:
http://pwp.att.net/p/s/community.dll...eid=310456&ck=
#4777
09-30-2013, 07:20 PM
Intermediate
Join Date: Apr 2013
Location: Northshore
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
#4778
09-30-2013, 10:05 PM
Cruiser
Installed a Memphis Audio bluetooth, 50 watt sound system and Memphis marine speakers on my Roadking.
