What did you do to your bagger today?
#2841
12-02-2012, 07:43 AM
Went down to Lindon Utah and found a new shop. Blackball Performance and they had a sale going on.
I was shocked to find an Air Cleaner and parts for my 99 FLHTCUI.
For about $100 dollars I got the following;
Arlen Ness Big Sucker A/C $15.00
Fat Boy Black A/C Cover $15.00
Harley Screamin Eagle Trim $2.00
99 FLHTCUI Intake Manifold with High Flow injectors $50.00 (all sensors working)
Battery tender for $22.00
There sale goes thru the week. They had hogtunes speakers in there for $50.00 bucks brand new in the box. So anyone in Utah. Head on down.
I was shocked to find an Air Cleaner and parts for my 99 FLHTCUI.
For about $100 dollars I got the following;
Arlen Ness Big Sucker A/C $15.00
Fat Boy Black A/C Cover $15.00
Harley Screamin Eagle Trim $2.00
99 FLHTCUI Intake Manifold with High Flow injectors $50.00 (all sensors working)
Battery tender for $22.00
There sale goes thru the week. They had hogtunes speakers in there for $50.00 bucks brand new in the box. So anyone in Utah. Head on down.
#2842
12-02-2012, 07:06 PM
Cruiser
Join Date: May 2012
Location: Lake Orion Mi
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
A burn out. First big one I did. Been shitty for a bit here and it was nice enough to pull it out and run it for a bit. So finished up with some smoke.
#2843
12-02-2012, 07:12 PM
I installed my new Rider Backrest on my 2008 FLHRC . Then took it for a 80 mile test ride. I was going to install it last week but the mounting stud plate the backrest bracket bolts to was missing .
This Saterday i was able to get to an HD Dealer & buy the missing studplate and plastic retaining washers , a cpl ss lock washers ect .
Then the really hard part ...... To get the mounting studplate fished up under the fender without removing the rear wheel i had to use some small plastic tubin g to pull the stud plate into place ...I also had to jack the bike up a bit ,fill the air shocks to max and let all of the air out of the rear tire to do this .
Still there was only about an 1/8 inch clearance and with the plastic tubing over the threaded studs they were tight against the tire and fender ...i just pulled the tubing threw the mounting holes in the fender and rotated the tire slowly till they were in place then grabbed one with needle nose locking plyers till i could get the plastic retaining washers in place.
Then i just bolted the mounting bracket on easy .
still getting it ajusted just right .
good ride 70f sunny.
This Saterday i was able to get to an HD Dealer & buy the missing studplate and plastic retaining washers , a cpl ss lock washers ect .
Then the really hard part ...... To get the mounting studplate fished up under the fender without removing the rear wheel i had to use some small plastic tubin g to pull the stud plate into place ...I also had to jack the bike up a bit ,fill the air shocks to max and let all of the air out of the rear tire to do this .
Still there was only about an 1/8 inch clearance and with the plastic tubing over the threaded studs they were tight against the tire and fender ...i just pulled the tubing threw the mounting holes in the fender and rotated the tire slowly till they were in place then grabbed one with needle nose locking plyers till i could get the plastic retaining washers in place.
Then i just bolted the mounting bracket on easy .
still getting it ajusted just right .
good ride 70f sunny.
Last edited by baust55; 12-02-2012 at 08:13 PM.
#2846
12-03-2012, 02:42 AM
Cruiser
Join Date: Nov 2012
Location: Gig Harbor Washington
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
I installed the daymaker LED headlight and spot lights. Had a friend of mine put in the turn signals front and rear. I ordered a LED tail light, but when I pulled it out of the package, it was a regular incandescent light.
Had to call the dealer and let them know about the mix up, they will order me a new one in the morning. I will post some pics when I get the fairing back on, I am waiting for some new speakers to arrive.
Had to call the dealer and let them know about the mix up, they will order me a new one in the morning. I will post some pics when I get the fairing back on, I am waiting for some new speakers to arrive.
#2848
12-03-2012, 08:03 AM
busy weekend. Installed my Truck Lite Phase 7 LED headlight & visor trim ring, then the big project, installed the Screamin' Eagle Heavy Breather, V&H Fuelpak & Throttlepak, & Big Shot Duals.
Weather has been shitty, so I couldnt get it out yet. Didnt wanna spray salt up with it, but it sounds friggin AWESOME!!!
Cant wait to get out and try it.
Weather has been shitty, so I couldnt get it out yet. Didnt wanna spray salt up with it, but it sounds friggin AWESOME!!!
Cant wait to get out and try it.
#2849
12-03-2012, 11:50 AM
2nd Gear
Join Date: Dec 2012
Location: Chesapeake, VA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Okay, no bike back on Saturday. Shop says it's "having electrical issues" since the bars were installed. I had it in the shop two years ago when my cruise control kept blowing fuses. HD said it was a "kinked" wire in the fairing, etc. The shop says the bike will only start when the cruise control button is in the "resume" position. Any ideas? Thanks!!!
