What did you do to your bagger today?
Looking great. Once you’re finished I’ll get your address to ship my take offs to get done!
The following users liked this post:
BrandonSmith (12-25-2023)
There I was...thinking about the 451 AD Battle of the Catalaunian Plains between the western Roman Empire and the Huns in which Atilla was defeated by the Romans and the Visigoths, (yeah, right) when I decided to cash in some of my points I get on the ol' Harley Visa card and bought the HD indoor motorcycle cover. I've been riding since the mid 1970s, and this is the first bike cover I ever owned. I got tired of the dust and debris getting on the EG when I'm in the garage sawing wood or painting something. I get a bit obsessed with the finish on my bike and cars. It bothers me to no end to have a dirty or dusty vehicle, so this cover will keep me from wanting to wash and wax the bike all the time. Yeah, the cover is "HD" (Hundred Bucks,) but it's well made (in China, of course) and fits well.
I need to get on this...
The following 2 users liked this post by NorthWestern:
Captain Glide (12-25-2023),
Frank the Real Biker (12-26-2023)
The following 3 users liked this post by BrandonSmith:
Originally Posted by FL_Moto;[url=tel:21501726
21501726]Looking great. Once you’re finished I’ll get your address to ship my take offs to get done!
$100/hr shop rate (includes supplies, tax, return shipping, etc.)
4 hours per fork
The following users liked this post:
FL_Moto (12-25-2023)
Started changing over some of the stock fasteners with Hale Speed ARP bolt kits.
Before
After
Before
After
Last edited by Cornpipe; 12-25-2023 at 03:06 PM.
The following 5 users liked this post by Cornpipe:
aboatguy (12-26-2023),
BrandonSmith (12-25-2023),
FL_Moto (12-25-2023),
PNW (12-31-2023),
wilburbill (12-27-2023)
Just knocked out the tappet covers and cam cover from stock hex heads to Hale Speed ARP bolt kits. Still have 3 hex bolts behind the header pipe that I will replace next hydraulic clutch bleed.
The following 4 users liked this post by Cornpipe:
Looks great!
Got the speakers installed in the lowers.
I also had to move my front wide band sensor a bit. I am using Daytona cylinders and the fins must be larger as I noticed the sensor was up against the cylinder. It wasn't quite touching it but if I needed to change it, I would have to take the exhaust loose. Might have heated the bung and bent it over a bit but didn't have a torch at home but had a mig welder...😁
I also had to move my front wide band sensor a bit. I am using Daytona cylinders and the fins must be larger as I noticed the sensor was up against the cylinder. It wasn't quite touching it but if I needed to change it, I would have to take the exhaust loose. Might have heated the bung and bent it over a bit but didn't have a torch at home but had a mig welder...😁
I decided I liked the look of the ARP bolts on my RKS so much I did the SGS.
Derby cover and outer primary cover are done.
Derby cover and outer primary cover are done.
The following 2 users liked this post by Cornpipe:
BrandonSmith (12-27-2023),
OkieBill (12-27-2023)