What did you do to your bagger today?
While I continue waiting for my seat to be completed, I had to borrow and old RK seat to get this thing rideable…
My seat is supposed to be completed tomorrow, but we’ll see.
This seat is good enough to get the test ride with, especially on such a beautiful SoCal day.
My seat is supposed to be completed tomorrow, but we’ll see.
This seat is good enough to get the test ride with, especially on such a beautiful SoCal day.
The following 3 users liked this post by 07UltraGuy:
The following users liked this post:
07UltraGuy (12-01-2023)
Thanks, bro.
I really appreciate all of the feedback, advice, and support you have offered while going through your own recovery process.
I really appreciate all of the feedback, advice, and support you have offered while going through your own recovery process.
The following users liked this post:
07UltraGuy (12-01-2023)
The following 2 users liked this post by 07UltraGuy:
Ghetto blaster (12-02-2023),
gonefortheborder (12-05-2023)
Yes, you and I are on the same page with blue.
The following 2 users liked this post by NorthWestern:
07UltraGuy (12-02-2023),
gonefortheborder (12-05-2023)
The following users liked this post:
aboatguy (12-23-2023)
The following 2 users liked this post by bklynbob:
07UltraGuy (12-02-2023),
OkieBill (12-03-2023)
Originally Posted by BrandonSmith;[url=tel:21476412
21476412[/url]]After spending my spare time over the past couple weeks replacing the shocks and struts, brakes, brake fluid, and engine oil in my car, and then putting up the Christmas tree and decorations, I finally had time to take the front end of the Harley apart for my Pro-Action fork kit install.
Before taking the forks out, I measure from the top of the fork tube to the top of the upper bracket: 4mm on the left fork, 5mm on the right… Maybe that is why my bike always pulled hard to the left?
Here are some pics of the situation I started with. I’m embarrassed at how filthy my bike is. The forks and wheels are awful.
Front right:
Front right closeup:
Front left:
Front left closeup:
As soon as the left fork came out, I could see the seal was no good. Fork oil all over the fork. I turned it upside down and it steady dripped.
Here’s a crappy closeup of the leaky seal.
Before taking the forks out, I measure from the top of the fork tube to the top of the upper bracket: 4mm on the left fork, 5mm on the right… Maybe that is why my bike always pulled hard to the left?
Here are some pics of the situation I started with. I’m embarrassed at how filthy my bike is. The forks and wheels are awful.
Front right:
Front right closeup:
Front left:
Front left closeup:
As soon as the left fork came out, I could see the seal was no good. Fork oil all over the fork. I turned it upside down and it steady dripped.
Here’s a crappy closeup of the leaky seal.