What did you do to your bagger today?
While it’s not as exciting as polishing and riding (even to work!), I painted my rear master cylinder lid to match the texture on the calipers, and the rest of my recent non-chrome add-ons.
I was going to just buy a replacement cover, but the ones I can find either have a DOT 5 label, or no label at all.
I had glued my old label to the chrome lid on the front master cylinder a few years ago, and that glue failed pretty quickly, so I won’t bother doing that again.
I ended up just replacing that lid.
I definitely prefer if the labels match the fluid within, so I opted to just repaint this one.
I was going to just buy a replacement cover, but the ones I can find either have a DOT 5 label, or no label at all.
I had glued my old label to the chrome lid on the front master cylinder a few years ago, and that glue failed pretty quickly, so I won’t bother doing that again.
I ended up just replacing that lid.
I definitely prefer if the labels match the fluid within, so I opted to just repaint this one.
The following 6 users liked this post by 07UltraGuy:
Av8rPaul (09-19-2023),
dafrisco (09-19-2023),
gonefortheborder (09-21-2023),
M1dn1t3 (09-20-2023),
NoRegerts (09-20-2023),
and 1 others liked this post.
While it’s not as exciting as polishing and riding (even to work!), I painted my rear master cylinder lid to match the texture on the calipers, and the rest of my recent non-chrome add-ons.
I was going to just buy a replacement cover, but the ones I can find either have a DOT 5 label, or no label at all.
I had glued my old label to the chrome lid on the front master cylinder a few years ago, and that glue failed pretty quickly, so I won’t bother doing that again.
I ended up just replacing that lid.
I definitely prefer if the labels match the fluid within, so I opted to just repaint this one.
I was going to just buy a replacement cover, but the ones I can find either have a DOT 5 label, or no label at all.
I had glued my old label to the chrome lid on the front master cylinder a few years ago, and that glue failed pretty quickly, so I won’t bother doing that again.
I ended up just replacing that lid.
I definitely prefer if the labels match the fluid within, so I opted to just repaint this one.
Heading to Lampasas for a reunion with my Army brothers, and then a few more days of like I said, wherever.... will probably be back there again November for the Twisted Sisters.
The following users liked this post:
NoRegerts (09-20-2023)
Cleaned it w/ brake cleaner and allowed it to dry thoroughly.
Wiped it down a/ a clean microfiber and shot 2-3 coats of paint, followed by 2 coats of clear.
I used this specific paint because it is really close to the same finish as the engine cases.
Got the 10,000 mile service done and new rear tire, and while they were at it I had Legend Revo-A shocks and the Axeo comfort fork cartridges installed. WOW what an immediate difference! No more rocking horse feel and amazed at how connected the bike feels to the road. So far I've only ridden the 18 miles home but Monday I leave on a 3000 mile ride from Vegas to central Texas and where ever else I end up.
The following users liked this post:
Rob Harper (09-20-2023)
So, it was 22 degrees this morning north of Edmonton. At least I got to disprove Rounders’ assertion that my lithium battery will not start my bike when cold. No problem whatsoever
Last edited by NorthWestern; 09-19-2023 at 08:05 PM.
The following 7 users liked this post by NorthWestern:
2K10FBLO (09-20-2023),
BIGDBC (09-19-2023),
crazytown (09-24-2023),
gonefortheborder (09-21-2023),
Harfar (09-20-2023),
and 2 others liked this post.
That's way too cold to be riding though…😉
Time for studded tires, lol. Reminds me of my first new bike. A 67 Harley 125cc, two stroke. I lived near Hebron Oh, then. Used to ride that little sucker in rain, snow and sun. Even rode two up with my older brother on the back, down a frozen creek. At least till we heard a weird noise and realized it was the ice cracking under us. Luckily we could exit the creek pretty easily, cause that was a good 5-6 ft deep. Ice and 2 wheels make for an interesting ride for sure. Never on anything that big though.
Does HD make a heated rode option? Lol.
Does HD make a heated rode option? Lol.
The following users liked this post:
Rob Harper (09-20-2023)
Don't invoke that clown into this thread. PLEASE!
Oh, to keep things on topic, I have been doing photoshoots with my bike, filming videos, and trying to expand my photography to the next level, working with companies to get exposure. My Instagram, albeit still very small, was finally made eligible for monetization. I even had Klock Werks reach out to me to start working with them.
The following 3 users liked this post by NoRegerts: