What did you do to your bagger today?
#2191
finally got a hold of a lift (borrowed from indy whoes off to Burning Man)
pulled fronk forks for seal and oil and discovered a sheared pinch bolt on left fork.
Whole tube sans Fork cap slide right out after I removed fender!
Decided while she was that far down, go ahead and paint loweres had a set of blk powder coated beer cans already.
One day job turned into weekend project with beer and smoke, it's all good.
Be better when I'm back rollin!
Wanted to also give a shout out to my indy, Mark of "Twin Thunder"
Thanks for the help, tools and friendship!
pulled fronk forks for seal and oil and discovered a sheared pinch bolt on left fork.
Whole tube sans Fork cap slide right out after I removed fender!
Decided while she was that far down, go ahead and paint loweres had a set of blk powder coated beer cans already.
One day job turned into weekend project with beer and smoke, it's all good.
Be better when I'm back rollin!
Wanted to also give a shout out to my indy, Mark of "Twin Thunder"
Thanks for the help, tools and friendship!
#2192
Got my order from FuelMoto today and immediately installed my 4" Jackpot slip-on's, FM air cleaner and the PC-5... The exhaust at idle was pretty mush almost stock like which I was surprised by but a little throttle input and braappp... The tone is very low with lots of bass when riding stop to stop... Cruising at 80 and you can't even hear the exhaust, it's real mellow...
#2195
Installed Fuelmoto Power Package-PC V, K & N Air Charger, Jackpot 4" slash ups.
Also installed Kuryakyn throttle servo cover & throttle body bracket while I was at it to dress it all up.
Also installed Kuryakyn throttle servo cover & throttle body bracket while I was at it to dress it all up.