What did you do to your bagger today?
HogWorkz sells them and they attach to the fender strut. They come in black and chrome. Looks like his were painted, and the color match looks spot on.
The following 3 users liked this post by NoRegerts:
Hill Country Customs. Thinking they were 75 bucks.
and only attach to fender
and only attach to fender
Last edited by JD Hog; 12-15-2022 at 10:10 AM.
So much cleaner!! Very nice!! Just watch as its so much easier to bump those hard bags now.
The following 3 users liked this post by Pantera99:
The following users liked this post:
JD Hog (12-16-2022)
Filled her tank, washer her down and changed stock handle bars to KST customs Vanguard 12" Spearheads. then drank a couple of beers.
The following 2 users liked this post by winger076:
Captain Glide (12-17-2022),
Steelie68 (12-18-2022)
Rode both bikes today. Not at the same time obviously and it was a balmy 48F. I actually got hot wearing too much gear and had to peel some layers off.
1991 FLHTC. Forks done (pics three pages up). Have been chasing down an intermittent starting prob. Found a prob in connector 34 inline from ignition switch to starter relay 30. All corroded and loosey goosey. Popped on a new Deutsch Connector and started right up.
Orange zip ties all ACE hardware had. They said the black are stuck on a ship somewhere. FJB
Orange zip ties all ACE hardware had. They said the black are stuck on a ship somewhere. FJB
Last edited by Captscotty; 12-17-2022 at 03:51 PM. Reason: Added model
The following 4 users liked this post by Captscotty:
Cool flow fan & hammock seat installed!! Picked them up from forum members for great prices!! Thanks guys!!
The following users liked this post:
Gliderider22 (12-24-2022)
Confirmed my oil filter cap wrench from my old Beemer fits the Harley oil filter just fine. Now I have to buy the plastic tray for under the filter for changing the oil. Sadly, the bike is sleeping in the garage for the winter.
Those formed funnels work great. Also learned a trick on my funnels instructions. Take a nail and pop a hole at 12 o’clock on the face of the filter. Rotate 180 degrees and let oil trickle out for awhile to prevent a gush. Never thought to do that but it works super.
The following 2 users liked this post by Captscotty:
Dynawobble (12-19-2022),
Steelie68 (12-19-2022)