What did you do to your bagger today?
Join Date: Apr 2020
Location: Southern Coast o' Maine ON DA BEACH!
Posts: 1,802
Received 643 Likes
on
461 Posts
Coming home!
Well, my bike's finally repaired after the crash of 13 Oct 2021! Cost? About $9K! It's being delivered back home next Thursday...pics posted shortly thereafter. Added more custom STUFF during the repair! (of course)
Good news OG try to keep it on the asphalt from now on. 😀
The following users liked this post:
Oil, Gas & Leather (01-27-2022)
Join Date: Apr 2020
Location: Southern Coast o' Maine ON DA BEACH!
Posts: 1,802
Received 643 Likes
on
461 Posts
LOL! Good idea. All I hafta do is WATCH THE ROAD instead of staring down at the tach! In order to accomplish this difficult (for me) task I swapped speedos for the KOSO HD-05 multimeter with oversize tachometer shown here:
https://www.denniskirk.com/koso-nort...waAsj5EALw_wcB
https://www.denniskirk.com/koso-nort...waAsj5EALw_wcB
Last edited by Oil, Gas & Leather; 01-27-2022 at 07:20 PM.
The following 2 users liked this post by johnanderson:
NoRegerts (01-28-2022),
Oil, Gas & Leather (01-27-2022)
Join Date: Apr 2020
Location: Southern Coast o' Maine ON DA BEACH!
Posts: 1,802
Received 643 Likes
on
461 Posts
The following users liked this post:
NoRegerts (01-28-2022)
Well I finally switched some wires I crossed lol damn bike was acting like Christine and trying to start in the RUN position . Besides that just completed minor touch ups on my build!
The following users liked this post:
Oil, Gas & Leather (01-28-2022)
i got hit by an older lady in a car midway through a 2 week bike ride last August. just stripping it down for repair and paint now.
The following 2 users liked this post by broke c7:
NoRegerts (01-31-2022),
Oil, Gas & Leather (01-28-2022)
What was wrong with your factory speedo?
I just rode it up and down the street to be sure it even worked. It will take some getting used to for me. I find it engages/disengages a lot closer to the grip, but it all works. I was hoping it would feel more like a cable, but all the action happens in relatively short travel of the clutch lever. Hope that doesn’t mean there is air in it. I ran a half a bottle of brake fluid through the master and the secondary. My bleeder device was not optimal.
The following users liked this post:
Oil, Gas & Leather (01-28-2022)
Getting the beauty cover off to access the slave cylinder is the biggest PITA! You have to loosen the header pipe, muffler, and brackets to have clearance.
The following users liked this post:
chopr147 (01-29-2022)