Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Radio Shack - Alarm Siren Install - 2011 RGC

Thread Tools
 
Search this Thread
 
  #191  
Old 06-16-2016 | 07:58 PM
stuckinnj's Avatar
stuckinnj
Advanced
Joined: Jan 2010
Posts: 88
Likes: 3
From: Northwest New Jersey
Default

Hardheaded - can you confirm the red siren wire connected to the Red/Orange and Black siren wire to the White/Green. Black wire is not used. If correct the switch wire, W/GN supplies the ground when armed.

I did this mod to my 06 Road King. Just purchased a 16 Road Glide Ultra and want add the siren. Just don't want to smoke any of the electronics.

Thanks in advance.
 
  #192  
Old 06-17-2016 | 10:50 AM
hardheaded's Avatar
hardheaded
Seasoned HDF Member
Joined: Oct 2012
Posts: 10,766
Likes: 2,642
From: St.Louis Mo.
Default

Originally Posted by stuckinnj
Hardheaded - can you confirm the red siren wire connected to the Red/Orange and Black siren wire to the White/Green. Black wire is not used. If correct the switch wire, W/GN supplies the ground when armed.

I did this mod to my 06 Road King. Just purchased a 16 Road Glide Ultra and want add the siren. Just don't want to smoke any of the electronics.

Thanks in advance.
yes, red to red and the black wire from the siren goes to the center of the plug. the black from the bike that's in the plug does not get used .
 
  #193  
Old 06-18-2016 | 05:12 PM
stuckinnj's Avatar
stuckinnj
Advanced
Joined: Jan 2010
Posts: 88
Likes: 3
From: Northwest New Jersey
Default

Thanks. All done and works just like my 06. Sweet addition without the HD cost.
 
  #194  
Old 07-25-2016 | 09:45 PM
B3vis's Avatar
B3vis
Cruiser
Joined: Jun 2016
Posts: 235
Likes: 36
From: Hooterville, Fl
Default

I used a Namz connector (#NMD-410016) on my '16 RGS. factory plug will plug right into it.
 
  #195  
Old 07-26-2016 | 08:45 AM
hardheaded's Avatar
hardheaded
Seasoned HDF Member
Joined: Oct 2012
Posts: 10,766
Likes: 2,642
From: St.Louis Mo.
Default

Originally Posted by B3vis
I used a Namz connector (#NMD-410016) on my '16 RGS. factory plug will plug right into it.
where did you buy this ?
 
  #196  
Old 07-26-2016 | 11:10 AM
SBates08's Avatar
SBates08
Extreme HDF Member
Joined: Jan 2013
Posts: 10,636
Likes: 1,239
From: Lake, Ms
Default

Originally Posted by hardheaded
where did you buy this ?
Here ya go.

http://m.ebay.com/itm/Namz-Mating-Co...-/262130000371
 
  #197  
Old 07-26-2016 | 09:02 PM
cdestuck's Avatar
cdestuck
Supporter
Veteran: Marine Corp
Joined: Dec 2006
Posts: 6,689
Likes: 217
From: Altoona, Pa.
Default

subscribed
 
  #198  
Old 07-26-2016 | 09:02 PM
cdestuck's Avatar
cdestuck
Supporter
Veteran: Marine Corp
Joined: Dec 2006
Posts: 6,689
Likes: 217
From: Altoona, Pa.
Default

Subscribed
 
  #199  
Old 08-12-2016 | 10:52 AM
B3vis's Avatar
B3vis
Cruiser
Joined: Jun 2016
Posts: 235
Likes: 36
From: Hooterville, Fl
Default

Originally Posted by hardheaded
where did you buy this ?
namz custom cycle products
 
  #200  
Old 08-13-2016 | 10:53 PM
B3vis's Avatar
B3vis
Cruiser
Joined: Jun 2016
Posts: 235
Likes: 36
From: Hooterville, Fl
Default

Done my Brothers 2016 RG Ultra this morning. 5 minutes tops to install as I had prewired it up.
 


Quick Reply: Radio Shack - Alarm Siren Install - 2011 RGC



All times are GMT -5. The time now is 10:15 PM.