Originally Posted by bogiediver

First - it addresses many who commented on the appearance of the P6 - the P7 physical unit looks more like traditional halogen lighting units, as far as the lens and reflector - yep, reflector. The LED is mounted to be rear projection into a complex reflector. There is one LED each for low & high - new technology obviously.

There has even been an update since the SEMA show - at SEMA, low beam and high beam had different LEDs, with high beam being a lower output. That's been updated, using the same higher output LED for both. The reflector was also updated to handle the higher output.

As with the P6 - high beam is added to low beam (as opposed to HD, where the low beam is switched off when high beam is selected); so both LEDs will be activated. Yet, the current draw will be LESS than P6 in both modes - over 25% less on low beam and 20% less on high.

Wish I could say I've actually seen this in my hand - so far just pictures.

Stay tuned, as I get more info I'll share. I hope to do a full review very soon.

Originally Posted by bogiediver

@ Intrepid175 -

I may not have been clear... the high beam is additive to the low beam in the TL applications - so even with the show version - the combined output when on high beam was greater than low beam alone. With the update - it's even more...

Originally Posted by tx-skydiver

I think the TL6 is butt ugly but a better light. I am excited about the TL7. Now if they can do something with the passing lamps too I will be extatic.