Road King 16" apes
#11
#12
If not check out BR Custom Bars and he can make you a set of bars to your exact specs. Won't be cheap though but good quality. We just put a set of his bars on my buddies road glide.
#13
I have 16" Carlini's Ganster apes and I had to notch out my windshield because I just liked the look and feel of the bars forward. I dont use the windshield except for long trips. Its not perfect but works. I rode it to sturgis with the windshield on and it had contact with the clutch cable and rubbed (cut) a spot on the cable. Not too bad, kinda looks like a bug hit the cable but still enough to **** me off. I modified the windshield again last month but havent tryed it again. I can post pics if you like. Good luck.
#14
7" pullback would be perfect I think. Im gona have to check them out!! They look sick as hell on your bike man!! Vey nice. Thanks for the info
#15
No sweat brother and thanks for the compliment, the wiring was a pain in the *** but glad it's done now, no RK's around me with these bars so my bike is different. I think the WO's with 12" of pullback would not have worked for me. I'm not as tall as you but have a big wingspan (long arms). Had to switch my sundowner back to stock to sit me further back. Might look into a tallboy seat or one of the solo seats.
#16
I have 16" Carlini's Ganster apes and I had to notch out my windshield because I just liked the look and feel of the bars forward. I dont use the windshield except for long trips. Its not perfect but works. I rode it to sturgis with the windshield on and it had contact with the clutch cable and rubbed (cut) a spot on the cable. Not too bad, kinda looks like a bug hit the cable but still enough to **** me off. I modified the windshield again last month but havent tryed it again. I can post pics if you like. Good luck.
Thanks.
Kenzo
#17
I just got my 17 inch Carlini Evil Ape's on last night and can still use my windshield, like stated above you need to adjust the bars with the clamp a little loose. I will only be using my windshield for very long rides though I like the clean look the bike has now with just the one headlight, the Ape's, and no crash bar or highway pegs.
Post some pics and welcome to the site.
Post some pics and welcome to the site.
#18
#20
Before mine were tightened down, the tech had me sit on it to get them set where it was comfortable for me. I reminded him that we needed to have the windshield on as well, b/c i knew I'd have this exact problem. As it stands, the shield and cables rub on the bars, but it's perfect for me at my height (5'9"). Then again, you can just ride without a windshield too. Unless you plan on traveling on the highway over 65 or 70mph. Then it's not worth it.