Congrats on the install....hope you like the woods cam you selected...dropped off my bike today to have a friend put an SE 204 set in my 2011 SG 103...hope that turns out well...in any case...enjoy your ride...
I just upgraded mine as well with plate, oil pump and dropped a set of 204's in my 04 EGC TC88. REALLY made a difference. Added a Stage 1 carb and air kit as well.
Last edited by SecondChance!!; 01-24-2011 at 12:58 PM.
You give me faith brotha. Fixin to take this on myself on my 06. This will be my first try at engine work so no beer can be consumed while working. Things go very wrong then.
You give me faith brotha. Fixin to take this on myself on my 06. This will be my first try at engine work so no beer can be consumed while working. Things go very wrong then.
If I can do it and not blow anything up, anyone can!!!!!!! Like you said, first time, no beer, and shop owners manual and your good to go. Take your time and triple check everything and you will be good to go.
I put the TW 555's in this weekend. It fired up ( which was a plus), but the pushrod's were not put in correctly. Trying to reset them tonight. It sounded mean, but the lifter noise was a little concerning. Hopefully nothing major went wrong when I cranked it.
Congrats...
I did the tw6-6 from fuelmoto along with the jackpot dyno tuned and pc5 and auto tune,
What a difference it made.. now its tore down for a 107kit from fuelmoto, just jugs n pistons n new lifters..
And doing it my self is much better .