Bleeding front brakes FLHR
#1
Bleeding front brakes FLHR
Is there a special way to bleed the front brakes with the dual front brakes or is just like a car? starting with the furthest from the master cyl? just put a new front brake line and bled each side and the lever has alot of travel before it applies the brakes.
Thanks
Thanks
#2
#3
#4
just like a car i dont know about that closest to the master cyl. thing i just did mine a month ago. i just squeezed the handle about 4 times and hold it down open the bleeder and the lever goes down do it about 4 to 5 tomes for each caliper and u should b good to go. but it would b nice to a extra set of hands so have your wife or friend to b the ones to squeez that lever. always keeping the master full of fluid.
#6
#7
Brake fluid is hygroscopic. The method described above may be a temporary fix, but the moisture collected by the brake fluid being exposed to the air overnight may cause worse long term problems.
Trending Topics
#9
go to an auto parts store, or a tool supply store, and get a hand held vacuum pump/bleeder , it has a t fitting and hoses , and a reservoir, zip tie the hose around the bleeder, open bleeders, and start pumping the vacuum pump, while filling the res.
couldn't be any easier than that , and it is also awesome on older bikes for replacing the fluid completely.
couldn't be any easier than that , and it is also awesome on older bikes for replacing the fluid completely.