OK fellas, I got my Woody's fairing last week, the outer is at the body shop receiving fresh paint, and I've set the inner on the bike and got started on the wiring. I've got the speakers done and I'm ready to tap into the bikes harness to power this puppy up. I haven't the slightest idea which harness to tap into. I assume my wiring is behind the headlamp. Any pics, pointers, instructions here would be fantastic! I ordered a Kenwood unit with "bluetooth, USB connector in the face for my pod, it's HD radio ready and XM sat. ready." The HD tuner is here but looks too big to install in the fairing, so I'm probably going to mount it on the bike somewhere...(probably in the left saddle bag). I need som help here before going further. I'll be following up and posting pics as the install goes along. Glenn's been great at Woody's and has been more than helpful, I just need some specific direction to tap into the bike!

 

best to pull a wire right from the battery with a fuse as close to the battery as possible.to make it quick connect ad connecters near the steering head for the hot and ground