Merry Christmas all,

I just installed a TP wall organizer and as I have a TP liner for a test fit I just stuck it to the liner using the fixed velcro sewn onto the back of the organiser.

It seems to stick well but there is so much additional velcro tape that is meant to be used I just wondered if others have used the complete kit of tape, or has anyone just stuck it to the felt liner?

Actually I expect it to loosen and start coming away due to bumps, hunps, and vibration but will see how long it stays in place before I start installing theother ch1t....

Thanks for your time in reply,
V2

 

I used every bit of what came in the package. I have the felt liner, so it helps to hold things in ploace. My organizer hasn't moved in 3 years unless I intentionally moved it.

 

Guess I have worse roads, or overload the organizer. Ours kept falling off after using all the velcro, and even after adding tons more velcro that we bought, it wouldn't stay attached. Our fix was to use a combo of the velcro and superglue, since I knew it's going to be there forever. Works fine now, been up for two years, and it stays full of stuff the wife throws in there.

ETA: Need more coffee...didn't read the OP correctly. I'm referencing the TP organizer that goes inside the lid, not on the walls. My bad.

 

I just stuck mine to the liner, didn't think the tape would stick to the felt.
It hasn't come loose even after an accident. Even if it did come loose where would it go?
Either way, you can always add (or remove) the Velcro tape if you have problems.

The lid organizers need every bit of Velcro provided + some more + bolts.

 

what he said ....

 

Since mine came loose, and I don't plan on taking it out, I attached my organizer to the liner with #6 X 1/2" machine bolts (6 of them). Now I don't have the organizer coming loose anymore.

 

All of this hardware for a roll of Toilet Paper ??? I see cabin fever setting in. Merry Christmas

 

I used the bolts that held my TP luggage rack on....

 

I did the same as the op. I just stuck it to the felt liner and did not use all the extra velcro and it has not moved at all, like someone said where can it go it is sitting on the bottom of the tourpak


Tim

 

So far the only slightly loose bits on the TP Wall Organizer are just where the curving corners are. Everywhere else seems to be stuck very well to the fuzzy TP liner so will see what happens.

As piasspj said the other bits that came with it can be used if needed.

Thanks for your replies and hope you are having a wonderful Christmas today, your time. We had ours yesterday down under being ahead of you in time.