Adding King TP to my FLHX 79071-09CGR Fits '09-later FLHX models Pewter Pearl and I need help with Part Numbers.

I dont want the 1 piece smooth backrest pad shown in the catalog I want the 2 piece set that comes stock on touring bikes like the EG in the picture below.

1) What is the part number for this 2 piece backrest?
1a) Am I going to have to drill holes on the lower half to install the lower pad?

2) What is the part number for the Rigid Tour Pack Mount and does it include necessary hardware?

Two dealers I've stopped by have been to busy to look up the parts or dont understand what Im asking or try to talk me into quick detach bracket. 1 parts guy thought they were all 1 piece I had to show him a bike on the floor.

Thank you!

 

Bump....

Hoping someone will help out....


.

 

52395-06A is the pn# for the whole backrest kit
52951-06 is the pn# for the lower pad only

 

As many guys as you see going with detachable tour paks on EG's I'd bet someone on here would sell you a rigid mount for you TP. It requires differenct strut covers also for rigid mount. There are 2 holes required in TP to attach lower pad.

 

Thank You!

 

Guess your going this way to avoid the gaps, right....

I do wish mine didn't have the gaps on both sides but the money's been spent already and it is what it is....I looked again yesterday and there are no adjustments that can be made. You would think all the backrests would fit snugly on all the tour paks but quality control is ancient history in most factories anymore.

Let us know if the two piece backrest fits tight against the tour pak.

 

Just went through the same thing. I couldnt stand the gaps so i returned mine and ordered the two pieces. The fit is so much better.

 

The "whole backrest kit" does not include the lower pad???

 

Can't figure this one out. The back rest lower pad on the one piece just hangs there and has no effect on the backrest section. Why would the one piece backrest fit flush with the tour pak and the two piece doesn't??? Inquiring minds want to know!!!!

I would return mine also but since I didn't buy it local, it would be a PIA and end up costing me a lot more for the exchange.

Hope these posts helps someone else looking to put a tour pak on their SG.

 

Originally I just thought it looked better not having that flap going up and down with the Lid and having to worry about it getting hung up on my Tallboy seat. Than I read about all the Gap Issues and that made my mind up for sure!

Im confused about the part numbers. I also want to know if the Top Part number comes with the lower pad.