Vance Hines Power Duals Or Fuel Moto 2-1-2 Or Fulsac 2-1-2 ?????
#1
Vance Hines Power Duals Or Fuel Moto 2-1-2 Or Fulsac 2-1-2 ?????
Looking to replace my stock header to get rid of the CAT and not sure which a/m one to buy.
Been trying to find a non CA stock header in the classifieds but havent had much luck.
Which one is better and will all 3 work with the SE slip ons I already have?
Vance and Hines Power Duals?
Fuel Motos 2-1-2?
Fullsac 2-1-2?
I dont want true duals and the Fuelmoto and Fullsac look almost identical.
Any suggestions? Any issues?
.
Been trying to find a non CA stock header in the classifieds but havent had much luck.
Which one is better and will all 3 work with the SE slip ons I already have?
Vance and Hines Power Duals?
Fuel Motos 2-1-2?
Fullsac 2-1-2?
I dont want true duals and the Fuelmoto and Fullsac look almost identical.
Any suggestions? Any issues?
.
#3
#4
#7
I am running the Fuelmoto 2-1-2 and am completed satisfied, and also have installed one on anther I build I did for another person on this forum, also a 107" HQ build. I have not had the other two pipes in my hands, so I cannot comment on those. I am betting though that the performance is not all that much different between them as all are the same basic design. The Fuelmoto pipe is stainless steel and is a well made, quality item.
The build, with this pipe was very easy to tune, I am running V&H Moster ovals as they are the sound I wanted, and I am not chasing numbers on this build so really didn't base decisions on peak HP or Tq capabilities.
The build, with this pipe was very easy to tune, I am running V&H Moster ovals as they are the sound I wanted, and I am not chasing numbers on this build so really didn't base decisions on peak HP or Tq capabilities.
Trending Topics
#8
Can't comment on the Fullsac pipes. However, I can comment on the Power Duals vs. OE headers. I have the Power Duals on two of our bikes. My Roadie has the Power Duals with the Monster Ovals and a PC-V from Jamie, cannot believe how well this plain jane 96 runs. I also have the Power Duals on the black bike (sig pic), but with the Hi-Outputs, not dialed in quite right just yet.
Here's one BIG problem with the Power Duals if you are even just a little interested in leaning your bike. The header touches down REAL early compared to the OE headers. When I say touches down, I'm not kidding. As in, front pipe, collector, and even the crossover pipe going to the left side of the bike. I don't care about grinding my floorboards and floorboard supports, but my damn pipes?!! An expensive lesson. Both my Roadie and the Electra Glide are ..... uh ....... ground up a bit. The only tiny blessing is that you can't quite see it when parked. But, at some point they will deteriorate and I'll need to replace them. The chrome ones on the Roadie won't be so bad, but the black ones were custom, so it'll be a pain.
If I do them over, I'll go with the Fuel Moto header because they're angled like the OE headers which means I can lean a lot further and I can utilize the OE shields. Now, if you don't ride like that and you ride a bit on the tame side, then by all means have at it with which ever feels right to you.
Your wallet has been warned!
Here's one BIG problem with the Power Duals if you are even just a little interested in leaning your bike. The header touches down REAL early compared to the OE headers. When I say touches down, I'm not kidding. As in, front pipe, collector, and even the crossover pipe going to the left side of the bike. I don't care about grinding my floorboards and floorboard supports, but my damn pipes?!! An expensive lesson. Both my Roadie and the Electra Glide are ..... uh ....... ground up a bit. The only tiny blessing is that you can't quite see it when parked. But, at some point they will deteriorate and I'll need to replace them. The chrome ones on the Roadie won't be so bad, but the black ones were custom, so it'll be a pain.
If I do them over, I'll go with the Fuel Moto header because they're angled like the OE headers which means I can lean a lot further and I can utilize the OE shields. Now, if you don't ride like that and you ride a bit on the tame side, then by all means have at it with which ever feels right to you.
Your wallet has been warned!
#9
Can't comment on the Fullsac pipes. However, I can comment on the Power Duals vs. OE headers. I have the Power Duals on two of our bikes. My Roadie has the Power Duals with the Monster Ovals and a PC-V from Jamie, cannot believe how well this plain jane 96 runs. I also have the Power Duals on the black bike (sig pic), but with the Hi-Outputs, not dialed in quite right just yet.
Here's one BIG problem with the Power Duals if you are even just a little interested in leaning your bike. The header touches down REAL early compared to the OE headers. When I say touches down, I'm not kidding. As in, front pipe, collector, and even the crossover pipe going to the left side of the bike. I don't care about grinding my floorboards and floorboard supports, but my damn pipes?!! An expensive lesson. Both my Roadie and the Electra Glide are ..... uh ....... ground up a bit. The only tiny blessing is that you can't quite see it when parked. But, at some point they will deteriorate and I'll need to replace them. The chrome ones on the Roadie won't be so bad, but the black ones were custom, so it'll be a pain.
If I do them over, I'll go with the Fuel Moto header because they're angled like the OE headers which means I can lean a lot further and I can utilize the OE shields. Now, if you don't ride like that and you ride a bit on the tame side, then by all means have at it with which ever feels right to you.
Your wallet has been warned!
Here's one BIG problem with the Power Duals if you are even just a little interested in leaning your bike. The header touches down REAL early compared to the OE headers. When I say touches down, I'm not kidding. As in, front pipe, collector, and even the crossover pipe going to the left side of the bike. I don't care about grinding my floorboards and floorboard supports, but my damn pipes?!! An expensive lesson. Both my Roadie and the Electra Glide are ..... uh ....... ground up a bit. The only tiny blessing is that you can't quite see it when parked. But, at some point they will deteriorate and I'll need to replace them. The chrome ones on the Roadie won't be so bad, but the black ones were custom, so it'll be a pain.
If I do them over, I'll go with the Fuel Moto header because they're angled like the OE headers which means I can lean a lot further and I can utilize the OE shields. Now, if you don't ride like that and you ride a bit on the tame side, then by all means have at it with which ever feels right to you.
Your wallet has been warned!
Just got back from a ride in the mountains with a little less floorboard than I started with. Soooooooo I will pass on the VH based on the info you posted above.
My Wallet Thanks You!
.