HQ 107" build in the works...
#76
wolfgang 103"
Tell me what you guys think of this build by Wolfgang Grasser.....You can find him on you tube!
Port and Polished Heads
Oversized valves
New flow improved guides,seals
wood 200 valve springs
compression releases machined and installed
fully ported intake and exhaust ports
combustion chamber completely reshaped and ported,
fly cut 0.040", flow test, clean and assemble--includes flow sheet,flow graph, and spec sheet on heads
bore and hone cyl 3.750 to 3.875
forged pistons 10.5:1
adjustable pushrods
wood cams
S&S head bolts
dyno and tune!
Port and Polished Heads
Oversized valves
New flow improved guides,seals
wood 200 valve springs
compression releases machined and installed
fully ported intake and exhaust ports
combustion chamber completely reshaped and ported,
fly cut 0.040", flow test, clean and assemble--includes flow sheet,flow graph, and spec sheet on heads
bore and hone cyl 3.750 to 3.875
forged pistons 10.5:1
adjustable pushrods
wood cams
S&S head bolts
dyno and tune!
Thread
Thread Starter
Forum
Replies
Last Post