Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Just wanted to say thanks

Thread Tools
 
Search this Thread
 
  #1  
Old 04-21-2010 | 07:53 PM
Colby45's Avatar
Colby45
Thread Starter
|
Novice
Joined: Apr 2010
Posts: 21
Likes: 0
From: South Carolina
Talking Just wanted to say thanks

I joined this forum when I was still lookin for a HD. Just wanted to say thanks to everybody for all your help. Just gettin started in the Harley world but tryin to learn all I can. Its a alot different then the old crotch rockets I'm used to. But like I said, still tryin to learn. Eventually I'll be able to post some advice to questions I see on here but right now all I know for sure is welding. So if you gotta question bout that gimme a holler. Thanks again for everything!


Colby
 
  #2  
Old 04-21-2010 | 08:05 PM
jTeX84's Avatar
jTeX84
Cruiser
Joined: Apr 2010
Posts: 110
Likes: 0
From: Kilgore, Texas
Default

Stick with it and ride safe! What did you end up getting?
 
  #3  
Old 04-21-2010 | 08:15 PM
ranger56528's Avatar
ranger56528
Extreme HDF Member
Joined: Mar 2008
Posts: 14,865
Likes: 4
From: Mn.on a lake,well nxt to a lake.
Default

Be safe and there are lots of folks here with good and well not so good advice hehehe..

Welder Ay........Just got done welding up 14 older steel docks for the resort,had ta weld some older Galvinized parts to steel on a couple grrrrrr....Never liked welding Galv cough cough....Should of used the old stick on them but Miged it all....
 
  #4  
Old 04-21-2010 | 08:17 PM
Colby45's Avatar
Colby45
Thread Starter
|
Novice
Joined: Apr 2010
Posts: 21
Likes: 0
From: South Carolina
Default

Originally Posted by jTeX84
Stick with it and ride safe! What did you end up getting?
Ended up gettin an 03 FLHRCI anniv. ed. with wide white walls, workin on some pics, havin trouble downloadin em.
 
  #5  
Old 04-21-2010 | 08:20 PM
Colby45's Avatar
Colby45
Thread Starter
|
Novice
Joined: Apr 2010
Posts: 21
Likes: 0
From: South Carolina
Default

Originally Posted by ranger56528
Welder Ay........Just got done welding up 14 older steel docks for the resort,had ta weld some older Galvinized parts to steel on a couple grrrrrr....Never liked welding Galv cough cough....Should of used the old stick on them but Miged it all....
Yeah never been a fan of galv... wont weld it unless I have to... Its worth the cost to me to get some mild steel and paint it or use stainless or aluminum... lol pretty much whatever I can do to avoid those little white flies
 
  #6  
Old 04-21-2010 | 08:26 PM
ranger56528's Avatar
ranger56528
Extreme HDF Member
Joined: Mar 2008
Posts: 14,865
Likes: 4
From: Mn.on a lake,well nxt to a lake.
Default

Originally Posted by Colby45
Yeah never been a fan of galv... wont weld it unless I have to... Its worth the cost to me to get some mild steel and paint it or use stainless or aluminum... lol pretty much whatever I can do to avoid those little white flies
1st off....Sounds like a nice ride ya got.....


I tried ta talk the owner into makeing new/steel braces but said he wanted to use them so cough cough hold my breath I went.....
 
  #7  
Old 04-21-2010 | 08:37 PM
IndyClassic's Avatar
IndyClassic
Outstanding HDF Member
Joined: Aug 2008
Posts: 2,951
Likes: 6
From: Kingman, AZ
Default

Good for you......enjoy! As to advice on here. Some guys you will learn to take as gospel, some you will always get a 2nd or 10th opinion and watch out for the "hot topics." The last will have you believing all HD's are going to explode immediately if you don't __________ (fill in the blank).
 
  #8  
Old 04-21-2010 | 09:37 PM
jTeX84's Avatar
jTeX84
Cruiser
Joined: Apr 2010
Posts: 110
Likes: 0
From: Kilgore, Texas
Default

Originally Posted by ranger56528
Be safe and there are lots of folks here with good and well not so good advice hehehe..

Welder Ay........Just got done welding up 14 older steel docks for the resort,had ta weld some older Galvinized parts to steel on a couple grrrrrr....Never liked welding Galv cough cough....Should of used the old stick on them but Miged it all....

Ugh, I work offshore, and I can't stand it when they fire up and start welding galv...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HotRodNut
General Harley Davidson Chat
44
02-09-2017 07:32 AM
JCK
Dyna Glide Models
6
06-07-2009 01:50 PM
Thunderchild
Touring Models
4
02-25-2008 11:40 PM
Grandpa56
Dyna Glide Models
13
01-10-2008 01:59 PM
chelle
General Harley Davidson Chat
37
02-05-2007 12:30 AM



Quick Reply: Just wanted to say thanks



All times are GMT -5. The time now is 06:27 AM.