The front brake rotors on my 1999 Road King are mounted with 5/16 bolts. I want to change to a set of rotors that use 3/8 bolts. Is there enough "meat" on the front cast wheel to drill these holes out and retap them to 3/8. Anyones thought on this would be a big help.
for safety's sake, i think i'd be looking at different rotors, ones which were designed for your bike rather than something that's not made for it. it would suck to end up dead.
for safety's sake, i think i'd be looking at different rotors, ones which were designed for your bike rather than something that's not made for it. it would suck to end up dead.
No $hit! Get the right rotor, sounds like your looking at a rear rotor not a front.