21 front with stock 16 rear
#11
2006 Road King here. I should have it back tomorrow with a new 21/16 combo. I'm a bit on the height challenged side and went with a new 16 inch rear on the recommendation from Rob at Hog Pro. My bike was already lowered by the previous owner, can't say by how much though. Will give impressions later and try to find out how much it has already been lowered.
#12
I recently installed some PM Heathens in 21"/17".
I didn't go with an 18" rear because I'm lowered in the rear and didn't want the tire to rub the harness. I had thought the factory size in the rear was 17" so that is what I ordered. Come to find out it"s a 16". No big deal, still looks good. I also went with a 200 rear tire.
I didn't go with an 18" rear because I'm lowered in the rear and didn't want the tire to rub the harness. I had thought the factory size in the rear was 17" so that is what I ordered. Come to find out it"s a 16". No big deal, still looks good. I also went with a 200 rear tire.
#13
If I were to do it again, I would go with the 16 in the rear vs the 18. Both look and ride good, and SG in lowered from the factory an inch in the rear, but for pure looks the bike looks best to me with the slighter lower 16" in the rear vs the 18". I may even swap mine out for a 16 some day. Too bad I sold my stock rims
#14
Thread
Thread Starter
Forum
Replies
Last Post
16, 18, 2009, 21, electraglide, front, harley, king, lower, motorcycle, picture, rallyrunner, rear, road, seat