2010 FLHTCU my cigarette lighter was not working, so i decided to replace it with a power point from harley. took faring front off, added the power point adapter, now no turn signals or horn.

i have the fairing front off, seat, fuse box cover off. stumped. fuse 8 for power point looked ok, and replaced anyway.

 

it sounds like something got unplugged, I would check all your connections. I am over in CI if you need a manual, I have a digital one

 

i'm in patchogue sitting on my steps looking at the bike.... bewildered. didn't move anything but the front fairing cover. i will do some checks at the connectors. the power point leads run into the harness... no connect except the orange and black at the body of the cig lighter assembly.

i can't figure anything else out yet.

 

It's a 2010...it's under warranty...why not let the dealer fix? Probably something really simple.

 

fuses...... if you touched the side with a wire and did not remove fuses first..... you blew a fuse somewhere

 

I think your checking the wrong fuse?

 

took a deep breath.
sat down w the dog and a beer.

checked ALL fuses.
P&A and Acc were shot.
all good now. AND I have my power point back!
thanks for bearing with me.

and yes... my manual is on order.

thanks again.
rob

 

y2kflhr - my fuse arrangement is slightly different for some reason. my two top rows are full. 8 being the 2nd row down, far right.

my brother in law believes i grounded it with my finger... could be right. didn't touch anything else.

time to put her back together.

 

that is from an 09, probably why its different, glad you got it sorted out, maybe we can get together for a ride soon....sure are close enough.....

 

sounds like a plan.
there is another member looking to do some riding, and he lives in commack i belv.

i did some group riding with friends this weekend. nice weather now. I ride year round, so this weather is a welcome change. i'll pm you some info.

rob