SG Fascia & Tail Light on my Roadie w Pics
#51
First the rear fascia, then the streched bags, and now the SG wheels. I bolted the fascia since I didn’t trust two sided tape.
08 FLTR Vivid Black - Color matched inner faring
Screamin Eagle Stage II - 103 ci 255 cams
TTS MasterTune
HD Premium Oil Cooler
Vance & Hines Ovals
Hawg Wired CX504 speakers and 1502 amp
XM Radio
HD Conquest GPS
Kuryakyn Driving Lights
Road Glide Headlight Bezel
Bagger-Brace Stabilizer
Glide Pro Bushings
Harley Pillow Seat and Detachable Backrest (Cross country setup)
Linbar Highway Bar
Soos Floorboard Extensions
TopShop 3” extended bags (Paint by Spade Bros. HB CA)
Lighted Rear Fascia
Street Glide Wheels
08 FLTR Vivid Black - Color matched inner faring
Screamin Eagle Stage II - 103 ci 255 cams
TTS MasterTune
HD Premium Oil Cooler
Vance & Hines Ovals
Hawg Wired CX504 speakers and 1502 amp
XM Radio
HD Conquest GPS
Kuryakyn Driving Lights
Road Glide Headlight Bezel
Bagger-Brace Stabilizer
Glide Pro Bushings
Harley Pillow Seat and Detachable Backrest (Cross country setup)
Linbar Highway Bar
Soos Floorboard Extensions
TopShop 3” extended bags (Paint by Spade Bros. HB CA)
Lighted Rear Fascia
Street Glide Wheels
#52
#53
Looking good Heywood! send mine off to painter next week. Gonna have him fill the holes.
This is a great thread to learn all about the SG taillite setup. I have purchased the tribar lite but ordered the one with no brake. Not enough research, bad me Also bought a street glide complete tail light setup but think I'm gonna resell that. Bought a lens for my RG setup and ready to order plate mount.
Loving the look of all these red baggers with the fat arsses on em!
This is a great thread to learn all about the SG taillite setup. I have purchased the tribar lite but ordered the one with no brake. Not enough research, bad me Also bought a street glide complete tail light setup but think I'm gonna resell that. Bought a lens for my RG setup and ready to order plate mount.
Loving the look of all these red baggers with the fat arsses on em!
#54
Well since you did the same mistake as I did, you'll have to get the blank plug so you can use the plug in to the tail light like I did.
BTW, the foam piece that has double sided tape is to stick on to the rear fender bracket at the bottom. I didn't have any instructions, but found this out after I got into it.
As for the holes, I just bought the HD rubber plug and gromet for the attenna.
BTW, the foam piece that has double sided tape is to stick on to the rear fender bracket at the bottom. I didn't have any instructions, but found this out after I got into it.
As for the holes, I just bought the HD rubber plug and gromet for the attenna.
#56
#59
Thanks for the help!
#60