Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Dissapointed with new LOW 2010 ultra seat part#52164-10

Thread Tools
 
Search this Thread
 
  #1  
Old 02-18-2010 | 09:28 PM
hddeuce2005's Avatar
hddeuce2005
Thread Starter
|
Intermediate
Joined: Jan 2010
Posts: 37
Likes: 0
From: illinois
Default Dissapointed with new LOW 2010 ultra seat part#52164-10

Big dissapointment

I picked up my new 2010 low ultra seat part number 52164-10 at local dealer today and measured height with it installed on my 09 ultra sitting on a lift table and level.My bike has been lowered 1 inch front and rear. It measured 28.50 inches tall.My new stock 09 ultra seat measured 28.75 inches.The lowest seat I run without my tourpack is a 08 street glide seat(which has no hump in the pan because they started that in 09) measures 27.25 inches.Sitting on both the 09 seat and the 2010 seal the 09 seat feels lower to me.My new seat will go back to the dealer tomorrow!!
 
  #2  
Old 02-18-2010 | 09:35 PM
testifer's Avatar
testifer
Road Master
Joined: Jan 2008
Posts: 963
Likes: 0
From: pa
Default

how is it comfort wise?
 
  #3  
Old 02-18-2010 | 09:48 PM
hddeuce2005's Avatar
hddeuce2005
Thread Starter
|
Intermediate
Joined: Jan 2010
Posts: 37
Likes: 0
From: illinois
Default

The 09 seat is more comfortable to me.Im 5.9 with a 29" inseam and am more flat footed with the 09 seat
 
  #4  
Old 02-18-2010 | 09:55 PM
testifer's Avatar
testifer
Road Master
Joined: Jan 2008
Posts: 963
Likes: 0
From: pa
Default

well i guess i will have to see when mine comes. i hated the 09 seat
 
  #5  
Old 02-18-2010 | 09:58 PM
hddeuce2005's Avatar
hddeuce2005
Thread Starter
|
Intermediate
Joined: Jan 2010
Posts: 37
Likes: 0
From: illinois
Default

You may like it better than I did
 
  #6  
Old 02-18-2010 | 10:12 PM
testifer's Avatar
testifer
Road Master
Joined: Jan 2008
Posts: 963
Likes: 0
From: pa
Default

well i also have a sundowner that i like. if i dont like the new seat im sure someone will take it
 
  #7  
Old 02-19-2010 | 06:45 AM
y2kflhr's Avatar
y2kflhr
Road Captain
Joined: Sep 2006
Posts: 600
Likes: 6
From: Central Islip, NY
Default

I am wondering if you could take a couple of measurements of the seat pan for us? I would like to compare the nose of the "low" to a stock seat, specifically if you were sitting on the seat where the thigh area would be, this is supposed to be narrower so your feet aren't as spread apart.

thanks
 
  #8  
Old 02-19-2010 | 06:53 AM
{Durf}'s Avatar
{Durf}
Advanced
Joined: Dec 2009
Posts: 50
Likes: 0
From: St. Augustine, FL
Default

Well, since no one's mentioned it.....keep in mind that your '09 seat is well broken in by now which means it's also partly "flattened" out a little...you know what I'm trying to say. The new seat probably IS going to measure a little higher at first.....until it's broken in too. Just something to consider. The overall comfort is far better than the first seat they had IMO. I'm also 5'8" with a 30" inseam, but I don't have trouble flat footing the bike at a stop either. I think the seat change is a definite positive, but like any seat out there it won't work for everyone. Hopefully you find one that fits.
 
  #9  
Old 02-19-2010 | 08:33 AM
Harleypingman's Avatar
Harleypingman
Extreme HDF Member
Joined: Apr 2006
Posts: 10,449
Likes: 44
From: Roswell, GA
Default

IIRC, the 2010 "new" seat is narrower than the seat it replaces, so the legs aren't spread quite so much when you put your feet down.
 
  #10  
Old 02-19-2010 | 08:54 AM
T K Glider's Avatar
T K Glider
Road Master
Joined: Nov 2009
Posts: 1,244
Likes: 2
From: castalia oh
Default

Does the new seat give you any more room from front to back?I have a 2010 trike so height is not the issue.I would like to move back some and would like a higher back stop.If they just removed foam it may be too hard.Can anyone describe the seating position?
 


Quick Reply: Dissapointed with new LOW 2010 ultra seat part#52164-10



All times are GMT -5. The time now is 07:29 PM.