Build details
Head going to Big Boys fot Port Polish CC & Mill
Piston Screamin Eagle Flat top
Cam Andrews 37 Chain drive
Pushrods Screamin Eagle Perfect Fit
Will end up with 9.8 to 1
Hoping for the 100/100 number.
How dose this sound everyone?

 

I would ask BigBoyz about the 37G cams with their heads.

 

i have the andrews 37 g cams,but mine are gear driven.no head work,stock pushrods that dynoed 95 hp,100 ft lb of torque.06 ultra.

 

Don't want to go gear cams.

 

Look at Andrews 26. they have good low end torque. I have them w/ flat top pistons and no head work and love them.

 

looking for mid to high tq and hp. For cruising and maybe pulling a trailer.

 

why dont you want gear drive?i love mine.

 

Cause crank run out. Chain drive makes the same power as gear drive.

 

if bean sets up the heads for the 37's you will be at 100/100. good choice of head porter and good choice of cam at 9.8 to 1.

I switched to gears but my tensioners looked like new at 24,000 so if I had to do it over again I would have kept tensioners. I have 76,000 now and no change in runout tho.

 

Thats what I like to hear.