Floorboard Inserts-Back Side
#1
Floorboard Inserts-Back Side
I replaced the rear pegs on my SG with a set of Floorboards. These are not the Streamliners. They are the D-shaped boards.
On the bottom of the boards is an area that has a raised rib. I am looking for something that will fit inside of the raised rib area in the middle of the board.
I am not asking about the rubber side of the board, but the metal side on the bottom that you see when they are folded up.
Thanks Guys!
On the bottom of the boards is an area that has a raised rib. I am looking for something that will fit inside of the raised rib area in the middle of the board.
I am not asking about the rubber side of the board, but the metal side on the bottom that you see when they are folded up.
Thanks Guys!
#2
#3
There is a guy on eBay that makes billet inserts really cheap. They are smaller than the chrome covers you can buy from the MOCO; that being said I think the chrome covers look better.
http://cgi.ebay.com/ebaymotors/Harle...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Harle...Q5fAccessories
Last edited by thereal142; 02-11-2010 at 09:03 AM.
#4
There is a guy on eBay that makes billet inserts really cheap. They are smaller than the chrome covers you can buy from the MOCO; that being said I think the chrome covers look better.
http://cgi.ebay.com/ebaymotors/Harle...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Harle...Q5fAccessories
Thread
Thread Starter
Forum
Replies
Last Post
mdchallenger43
Want To Buy Motorcycles/Parts/Accessories
0
01-28-2015 06:04 PM