Oil Temp Gauges to replace "Ambient Air Temp" Guage
#11
RE: Oil Temp Gauges to replace "Ambient Air Temp" Guage
ORIGINAL: dawg
Are the LED dipstick oil temp jobbies just as accurate? Seems like it would be less of a hassle to put in a new dipstick with a guage, just my .02. But, as with everything else on here I will probably put this shabang on my wish list for future mods[]
Are the LED dipstick oil temp jobbies just as accurate? Seems like it would be less of a hassle to put in a new dipstick with a guage, just my .02. But, as with everything else on here I will probably put this shabang on my wish list for future mods[]
More importantly, you can not read them while you're riding. I can say, from experience, that if my guage reads 210 while riding in the Interstate.... by the time I can exit and come to a stop on the svc road, the temp can fall as much as 10 degrees. If you have to stop to read it, you'll never know what it was while you were riding.
I've had the McEwan on two baggers and a Dakota Digital on another. My preference is the McEwan ~ the one Wally's carries.
#12
#13
RE: Oil Temp Gauges to replace "Ambient Air Temp" Guage
ORIGINAL: valvestem
The Wally's one has a sending unit that attaches in/to the oil pan, the HD gauge uses an inline adaptor with a sending unit installed in the adaptor.
The Wally's one has a sending unit that attaches in/to the oil pan, the HD gauge uses an inline adaptor with a sending unit installed in the adaptor.
#14
RE: Oil Temp Gauges to replace "Ambient Air Temp" Guage
So other than price, is there any difference between Wally's and HD's gage?
What's the deal with the inline adapter on the HD unit? Sounds like it can be attached into the oil pan just like Wally's. Is it supposed to go some where else? Does one hang down any lower than the other? Any chance of breaking if I bottom out on a speed bump?
Just trying to get some insight and decide on which one to go with.
ORIGINAL: valvestem
The Wally's one has a sending unit that attaches in/to the oil pan, the HD gauge uses an inline adaptor with a sending unit installed in the adaptor.
The Wally's one has a sending unit that attaches in/to the oil pan, the HD gauge uses an inline adaptor with a sending unit installed in the adaptor.
What's the deal with the inline adapter on the HD unit? Sounds like it can be attached into the oil pan just like Wally's. Is it supposed to go some where else? Does one hang down any lower than the other? Any chance of breaking if I bottom out on a speed bump?
Just trying to get some insight and decide on which one to go with.
#15
RE: Oil Temp Gauges to replace "Ambient Air Temp" Guage
I own and run a Rodger McEwan = he is the Maker of most of the guages you find in the books... His Customer service is 110%. I lost my inst for the wiring. Look up his number, called left a message - he called back and helped me out - then a week later he called again to see if all was working right. the link below talks about his spun alum guages, but if you do a search on his name, you will learn more.
https://www.hdforums.com/m_158029/mp.../tm.htm#158029
https://www.hdforums.com/m_158029/mp.../tm.htm#158029
#16
RE: Oil Temp Gauges to replace "Ambient Air Temp" Guage
Just had the piece of ambient sh** replaced with the white face oil gauge on my 06 SG. Works great. Anyone want an ambient temp guage for their bike? What a waste of space. In houston, the damn air temp thing always read 120. Even in December.
#17
#18
RE: Oil Temp Gauges to replace "Ambient Air Temp" Guage
the diff is...as TxBowHunter pointed out to me just to ruin my good thing...is that the needle on the Wally gauge does not perfectly match the HD needles on the other gauge...i'd been runnin it for a few months, til he just HAD to point it out [:@]
but the HD gauge is a pain to install if you put the sensor in the oil line where they tell you...unless you got girlie fingers
but the HD gauge is a pain to install if you put the sensor in the oil line where they tell you...unless you got girlie fingers
#19
RE: Oil Temp Gauges to replace "Ambient Air Temp" Guage
I plan on putting in an oil gauge on my next oil change, but when I had the faring off installing the MP3 Player, I relocated the Air Temp sensor to under the faring where it gets air movement all the time.
I still dont like it, but at least I get a semi accuracte read on the temp outside... HOT
I still dont like it, but at least I get a semi accuracte read on the temp outside... HOT
#20