Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

pushing 09-10 Harley with Chinese wiring

Thread Tools
 
Search this Thread
 
  #1  
Old 01-22-2010 | 09:20 PM
domm's Avatar
domm
Thread Starter
|
6th Gear
Joined: Sep 2009
Posts: 12
Likes: 0
Default pushing 09-10 Harley with Chinese wiring

Looks like the 60"s - 70"s has returned ???? How can Harley let this happen again ??? Sight & rumors a plenty of people pushing new Harleys due to the electrical system which makes you grit your teeth ! Harley has now come out with a recall to replace all that chinese wiring & computors but , for those that don"t know keep on pushing unless you still have your early 08 back with the Mexico built computor & wiring harness that are well built with no problems. Better get in line at the Harley dealer or find your self a pushing up some long mountain path . Good luck . 08 ultra # 617849 Born 08-02-07 "luckly"
 
  #2  
Old 01-22-2010 | 09:25 PM
XKnight's Avatar
XKnight
Outstanding HDF Member
Joined: Oct 2009
Posts: 3,225
Likes: 9
From: 3rd Stone From The Sun
Default

Excellent! Thanks for cheerful post.
 
  #3  
Old 01-22-2010 | 09:29 PM
davessworks's Avatar
davessworks
Outstanding HDF Member
Joined: Jul 2007
Posts: 3,341
Likes: 8
From: Woodinville, WA
Default

Originally Posted by domm
Looks like the 60"s - 70"s has returned ???? How can Harley let this happen again ??? Sight & rumors a plenty of people pushing new Harleys due to the electrical system which makes you grit your teeth ! Harley has now come out with a recall to replace all that chinese wiring & computors but , for those that don"t know keep on pushing unless you still have your early 08 back with the Mexico built computor & wiring harness that are well built with no problems. Better get in line at the Harley dealer or find your self a pushing up some long mountain path . Good luck . 08 ultra # 617849 Born 08-02-07 "luckly"
Got anything more than this to go on? If not then it sounds a bit dodgy.
 
  #4  
Old 01-22-2010 | 09:33 PM
lp's Avatar
lp
Seasoned HDF Member
Joined: Jan 2006
Posts: 11,369
Likes: 2,867
From: Charleston, SC
Default

domm = makstv5 = BountyHunter.

lp
 
  #5  
Old 01-22-2010 | 11:27 PM
JimTJr's Avatar
JimTJr
Outstanding HDF Member
Joined: Apr 2007
Posts: 2,884
Likes: 74
From: Goldsboro, NC
Default

I have a difficult time believing something made in MEXICO is going to be much better than something made in China,, Either one is cheaper labor, and probably equal. Most electronics are made in Malaysia or China anyway,,,,
 
  #6  
Old 01-22-2010 | 11:43 PM
Oldman Harley's Avatar
Oldman Harley
Road Captain
Joined: Dec 2007
Posts: 528
Likes: 0
From: Desert Aire, Washington
Default

I smell a Troll

 
  #7  
Old 01-23-2010 | 12:34 AM
acftgrunt's Avatar
acftgrunt
Cruiser
Joined: Nov 2008
Posts: 235
Likes: 0
From: Anderson, SC
Default

Is there a recall document that you can reference this to?
 
  #8  
Old 01-23-2010 | 12:34 AM
davessworks's Avatar
davessworks
Outstanding HDF Member
Joined: Jul 2007
Posts: 3,341
Likes: 8
From: Woodinville, WA
Default

Originally Posted by Oldman Harley
I smell a Troll

Ya think?
 
  #9  
Old 01-23-2010 | 12:47 AM
leicafish's Avatar
leicafish
Outstanding HDF Member
Joined: Jun 2007
Posts: 3,364
Likes: 29
From: So Cal The Golden State
Default

OK McFly, When you are done pushing the Harley you might as well push your car also.

Sorry Moderator OP is an idiot and the correct spelling is "computer"
 
  #10  
Old 01-23-2010 | 12:49 AM
acchd's Avatar
acchd
Outstanding HDF Member
Joined: Apr 2008
Posts: 2,964
Likes: 73
From: Charlotte Metro


Quick Reply: pushing 09-10 Harley with Chinese wiring



All times are GMT -5. The time now is 10:38 AM.