Handle bars & the Dealer
#11
RE: Handle bars & the Dealer
Just wanted to put my 2 cents in. DO IT YOURSELF! I spent 450 for everything--cables /bars-chubbys 16" flame engraved/cables holders & all-took about 5 hours to install. Take your time---Learn. GOOD LUCK
TOOLBOX
[IMG]local://upfiles/11196/8BF4DEA826AD40BDA95F5D5F26AB8CF2.jpg[/IMG]
TOOLBOX
[IMG]local://upfiles/11196/8BF4DEA826AD40BDA95F5D5F26AB8CF2.jpg[/IMG]
#12
RE: Handle bars & the Dealer
I just wanted to add, I wouldn't buy the cable extensions unless you don,t feel you have the time and it doesn't take much skill to extend your wireing hardness. Get pencil soldering iron and stagger the wires a couple of inches when you cut them and leave a couple of inches of the wires by the connecting clips for identification of color wire and some heat shrink and heat gun, and go for it. You can use one color wire that way in the middle of your extension and save I belieave about $100.00 dollars depending if you have most of these tools or not.
#13
#14
RE: Handle bars & the Dealer
Great information, reefteach
Thread
Thread Starter
Forum
Replies
Last Post
rvnkontum
Touring Models
37
01-02-2014 04:39 PM