I need some answers!? I bought the HD # 70264-94A two into one wiring harness adapter. I want to run my heated vest off the accessory switch located on the inner fairing. (2008 FLHX) I only need a positive and a ground to connect the vest's plug to. I also purchased all the parts shown on the service parts list. ie: the pins, socket housing, etc. All I need to know is: which color wires will provide me with the power and ground I need to finish up this otherwise easy install.? any help is good!
Don't want to come across an an a**, but no matter what anybody told me, I would meter the wires to make sure which one is hot by the switch. You can also tell which one is the gound that way.
The wiring diagram in the service manual is pretty easy to read and shows the connection. The wire connector is found under the seat in front of the battery on the RKC.
Yes, Gerbing makes a cigerette plug for their heated clothes. I have the G3 gloves and just ran the power straight to the battery like my battery tender, has inline fuse for protection to.