Chrome display Stand 91573-09
#1
#2
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
I have one installed on my '09 Ultra. When taking the bike off the stand by pushing forward, the stand kind of smacks the crossover pipe. It hasn't caused any damage though, just makes a smacking sound. It doesn't rub the pipe though but rides very close in the retracted position. I've had it on the bike for around 5,000 miles with no problems.
#4
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
My buddy had 1 installed on his mint 05 ultra, after the dealership installed it the bike fell over 2 times in a day from someone just barely and i mean barely touching the back of bike, it seemed it had to resistance what so ever to raise up.
not trying to ruin your new add on , just becarful with it .
hopefully my buddies was just installed incorrectly!!!
not trying to ruin your new add on , just becarful with it .
hopefully my buddies was just installed incorrectly!!!
#5
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Just got off the phone with H-D Customer Care about the problem with the Chrome Display Stand hitting the crossover pipe on my '09 FLHT. They responded to my complaint letter very quickly, but did not have much to say regarding a solution to the problem. Rep said he was aware of other owners having same issues upon installation. Attributed this to the close tolerances between stand and exhaust along with slight variations in mass-produced bikes. Seems like the tolerances should have been relaxed a bit during design of the stand to allow for this variation.
On a somewhat positive note, I returned the item to the dealer (Lake Shore H-D) for a refund with no hassle. Would have liked to use a Harley part, but in this case it looks like I'll be going to the aftermarket for a center stand that works.
On a somewhat positive note, I returned the item to the dealer (Lake Shore H-D) for a refund with no hassle. Would have liked to use a Harley part, but in this case it looks like I'll be going to the aftermarket for a center stand that works.
#7
Thread
Thread Starter
Forum
Replies
Last Post