New RG stuff installed...Pics!
#11
10-28-2009 | 08:39 PM
Cruiser
Joined: Feb 2008
Posts: 195
Likes: 0
From: Death Valley, Arizona
the clear lens has 4 tabs 2 on top and 2 on bottom that need to be pushed in. I used a super thin flat head with tape around paint to keep from scratching or chipping...make sure to take your time it is fussy but it will come out i recommend going for the top tabs first they seemed to come easier
#12
10-30-2009 | 02:56 PM
Intermediate
Joined: Mar 2009
Posts: 44
Likes: 0
From: Fremont, Ca
With that being said would it be a bad idea to remove the lens on a 08 RG. I was going to use the black bezel and remove my headlite cover "lens".
#14
10-30-2009 | 08:10 PM
Tourer
Joined: Feb 2009
Posts: 369
Likes: 0
From: Fort Worth TX
lot of people have done it, including me and never had an issue. then again i have never losta dealight to a rock on any car truck or bike ever owned.
#15
10-30-2009 | 09:30 PM
I'm ordering the bezel this weekend myself and am gonna run with the stock lights. I may run some 3M clear protectors on there just to be safe. I(f'n I get a crack then I will spring for the hardened lights.
Thread
Thread Starter
Forum
Replies
Last Post
