KURYAKYN LED COMPARED To the BAL LED TAILIGHT?
#11
Sorry absolutely no comparison. I have been behind several people with the Kuryakyn and IMO they are dangerous. You can barely see them in the daylight. In the direct sun forget about it. The BAL is a whole different ballgame. You can see this thing from 1/4 mile away in the daytime even on it's dimmest setting. And the quality of the BAL is top notch.
This is the BAL in run mode.
And in brake mode.
This is the BAL in run mode.
And in brake mode.
#13
No those are Radiantz LED clusters which BTW I do not recommend. They are bright and work good but are prone to having LEDs go out. Had three different ones lose lights including the one in my pics. And Radiantz customer service, when having to deal with warranty replacement, for lack of a better word sucks.
#14
No those are Radiantz LED clusters which BTW I do not recommend. They are bright and work good but are prone to having LEDs go out. Had three different ones lose lights including the one in my pics. And Radiantz customer service, when having to deal with warranty replacement, for lack of a better word sucks.
#16
#17
When I bought my RKC used it had the Kuryakyn LED on it.I thought it was bright,brighter than the stock ones I compared it to.
After 1.5 years I spotted a BAL on display at the dealership.Checked it out....
After I was able to see again,I ordered one.
That was 2 months ago.I noticed people staying further back while rolling an stopped within the first ride after installation.
Installation is about 3 minutes,if you take it slow.
There really isn't any comparision between the two.
After 1.5 years I spotted a BAL on display at the dealership.Checked it out....
After I was able to see again,I ordered one.
That was 2 months ago.I noticed people staying further back while rolling an stopped within the first ride after installation.
Installation is about 3 minutes,if you take it slow.
There really isn't any comparision between the two.
#18
#19