Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Any options for adding a tail light to 2010 SG?

Thread Tools
 
Search this Thread
 
  #41  
Old 05-04-2010 | 07:33 PM
evokenevo's Avatar
evokenevo
Intermediate
Joined: Nov 2009
Posts: 31
Likes: 0
From: so cal big bear lake
Default

to dirt racing 23, where did you get the lights, i want to find some that will fit in the gromets hole on the fillers, thank you
 
  #42  
Old 05-05-2010 | 02:53 PM
sfchief's Avatar
sfchief
Tourer
Joined: Mar 2009
Posts: 348
Likes: 7
From: Idaho
Default

A simple solution might be a 6 in led light bar under the license plate. I removed the red reflector and installed the light in its place. Purchased from Custom Dynamics for about $40. Clean install, no mods needed, lots of light.
 
  #43  
Old 05-05-2010 | 03:38 PM
dirtracin23's Avatar
dirtracin23
Road Warrior
Joined: Aug 2007
Posts: 1,979
Likes: 4
From: Central IL
Default

Originally Posted by evokenevo
to dirt racing 23, where did you get the lights, i want to find some that will fit in the gromets hole on the fillers, thank you
My painter ordered them. He is filling in the holes where the grommet on one side and and antenna on the other go. He is not actually using those holes for the led lights in the fillers but frenching the lights in below those holes.
Here's a link to some lighting. Don't know if any af these will work for your app or not.

http://www.milwaukeebagger.com/category_s/49.htm
 
  #44  
Old 05-05-2010 | 03:59 PM
skratch's Avatar
skratch
Seasoned HDF Member
Joined: Jan 2007
Posts: 20,567
Likes: 4,381
From: anacoco, la
Default

Originally Posted by bfrank
I have the '10 SG and I added the tri bar brake light. I was kinda pissed HD didn't do that out of the factory but for safety I got over it. If I compare my brake light to my friends '08 stock SG light mine is brighter. Both during the day and after dark. If you want even more light get the air wing luggage rack and add the LED to that. Now you have more than enough light without having to drill/cut the fender.

http://www.harley-davidson.com/gma/g...bmLocale=en_US

Originally Posted by hd_rolling
I didn't know the 10 SG's were offered without the tri bar? Mine had it, was that a dealer installed option?
Originally Posted by bfranl
THe standard light is only a running light. The link I posted adds a brake light to the tri-bar.


like bfrank says, the stock piece from the factory is just a running light, the link he supplied is to the p&a catalog for the brake/run adapter. bought from zanotti's it's $102 and some change. i know, i just ordered one......
 
  #45  
Old 05-06-2010 | 12:23 PM
bfrank's Avatar
bfrank
Tourer
Joined: Nov 2009
Posts: 294
Likes: 0
Default

Originally Posted by skratch
like bfrank says, the stock piece from the factory is just a running light, the link he supplied is to the p&a catalog for the brake/run adapter. bought from zanotti's it's $102 and some change. i know, i just ordered one......
Just to clarify that link is to a complete light replacement. The install is pretty easy would have been easier with a lift but I did it ok on the jiffy stand in my garage.
 
  #46  
Old 05-06-2010 | 02:55 PM
evokenevo's Avatar
evokenevo
Intermediate
Joined: Nov 2009
Posts: 31
Likes: 0
From: so cal big bear lake
Default

Thank u dirtracing23, i will check for sure, regards evokenevo
 
  #47  
Old 05-17-2010 | 08:44 AM
chasd's Avatar
chasd
Cruiser
Joined: Feb 2009
Posts: 200
Likes: 1
Default

I had a bright *** light on my RG but my 2010 Street Glide does not give me that option. Plasma lights look good. The harley "upgrade" is OK but I am so pissed they did not include it for safety on a $20K bike i want to find another option. Preferably something as bright as bright *** and pulsating. Anyone come up with other brake lighting upgrades for the 2010 FLHX or FLTRX?
 
  #48  
Old 05-17-2010 | 08:49 AM
Hunter2678's Avatar
Hunter2678
Cruiser
Joined: Mar 2010
Posts: 218
Likes: 1
From: Dublin Ohio
Default

Originally Posted by IsaacL
Haven't seen it in person yet, but I am glad it is bright - it'd have to be!!

They (oem bulbs) really are super bright...I was concerned at first myself but once I saw them in action I was put at ease...J&P cycles has the cluster LED replacement bulbs for these that are about 7-8 bucks a pc...Those should be even brighter.
 
  #49  
Old 05-17-2010 | 09:34 AM
Navy Mustang's Avatar
Navy Mustang
Road Master
Joined: Jan 2009
Posts: 975
Likes: 313
From: El Cajon, CA
Default

Originally Posted by Cyphilis
the lights on the fender extension and the 2 bulbs up top... it looks like a smiley face going down the road at night if your following me.
LMAO! That's exactly what I was thinking. Once you get the image in your hear there's nothing you can do to get rid of it. Guess it's better than a sad face...
 
  #50  
Old 05-17-2010 | 09:56 AM
roadgliderick's Avatar
roadgliderick
Outstanding HDF Member
Joined: Jul 2009
Posts: 2,313
Likes: 5
Default

i was told if u dont own a new cvo u cant buy the screamin eagle lites off the 2010. cuz i wanted to buy that same setup they said no cuz i didnt have a cvo. they will ask for your vin number and that will tell them anything about your bike.
 


Quick Reply: Any options for adding a tail light to 2010 SG?



All times are GMT -5. The time now is 08:17 PM.