Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Windshield advice for my 08 Ultra

Thread Tools
 
Search this Thread
 
  #1  
Old 09-14-2009 | 01:40 AM
Born2cure's Avatar
Born2cure
Thread Starter
|
Road Captain
Joined: Oct 2007
Posts: 743
Likes: 0
From: Morris, Il
Default Windshield advice for my 08 Ultra

Can use some advice. Have a Cee Baily Super Step Contour 15" windshield was a little small was getting the wind right in the eyes, if I tuck my 2nd chin in it was fine. Then I purchased a road zeppelin seat, very nice by the way. My problem is now I'm sitting taller in the saddle, so I need a new windshield. I like to look over the shield so it can't be to tall. I'm thinking of the clearview 14.5" tinted With Upper Recurve. Or the Memphis Shades 15" inch But wondering if this would be to tall. I'm 6'2" sit rather straight in the sadddle, the stock shield was low. Anybody riding with one of these on there EG. Any advice would be helpfull.
Thanks John
 
  #2  
Old 09-14-2009 | 06:08 AM
ezriderpgh's Avatar
ezriderpgh
Outstanding HDF Member
Joined: Feb 2008
Posts: 2,157
Likes: 1
From: Pittsburgh, PA
Default

Holy crap man! I am 6'2" and I can't see over anything taller than 10". I now run a LongRide 8" and it's fine. You must be all neck or something.
 
  #3  
Old 09-14-2009 | 06:14 AM
backdoc_rider's Avatar
backdoc_rider
Tourer
Joined: May 2009
Posts: 332
Likes: 0
From: Smithfield, NC
Default

Originally Posted by ezriderpgh
Holy crap man! I am 6'2" and I can't see over anything taller than 10". I now run a LongRide 8" and it's fine. You must be all neck or something.
I was thinking the same thing. I can't see over the stock 12"
 
  #4  
Old 09-14-2009 | 06:34 AM
KopperTop's Avatar
KopperTop
Road Captain
Joined: Mar 2009
Posts: 702
Likes: 1
From: U.S.S.A.
Default

Goes to show you how height alone can be deceiving. I'm 6'1" and the stock 12" shield is right in my line of sight with the stock seat. The Clearview 9.5" with recurve works perfectly for me - I can see over it well and there's no buffeting.
 
  #5  
Old 09-14-2009 | 06:46 AM
rapz's Avatar
rapz
Road Captain
Joined: Aug 2005
Posts: 629
Likes: 3
From: Mission, Texas
Default

Call Clearview w/recurve and they'll help you out, even send you a couple of sizes and you just return the one you don't want.
 
  #6  
Old 09-14-2009 | 07:01 AM
Bowhunter61's Avatar
Bowhunter61
Road Warrior
Joined: Feb 2009
Posts: 1,272
Likes: 129
From: Now Western TN
Default

Originally Posted by KopperTop
Goes to show you how height alone can be deceiving. I'm 6'1" and the stock 12" shield is right in my line of sight with the stock seat. The Clearview 9.5" with recurve works perfectly for me - I can see over it well and there's no buffeting.
+1 on this, I am 6'1" and have a Cleraview 9.5" recurve, perfect height for me. Damn, a 15" windshield would be pretty tall, I would be looking through it for sure.
 
  #7  
Old 09-14-2009 | 07:02 AM
Texas Fat Boy's Avatar
Texas Fat Boy
Extreme HDF Member
Joined: Dec 2006
Posts: 10,045
Likes: 34
From: ST. Louis
Default

Cee Baily Super Step Contour is measured differently. They measure the lenght of the shield not the height of the sheild. I'm 6' and had a 13 1/2"" Cee Baily and it wasn't near tall enough. I know have a 9 1/2" Clearview and it's perfect.

The Cee Baily way to measure


Everybody else's way to measure
 
Attached Thumbnails Windshield advice for my 08 Ultra-goofy.jpg   Windshield advice for my 08 Ultra-correct.jpg  
  #8  
Old 09-14-2009 | 08:00 AM
ks-waterbug's Avatar
ks-waterbug
Cruiser
Joined: Sep 2008
Posts: 142
Likes: 0
Default

My winter shield is a Clearview 15.5 with recurve and I promise you won't be looking over it.... I'm 6'5"
I'm following your post cause I wondered to what is a good long haul shield that I can still look over. Gets pretty expensive playing the guessing game with shield heights.
 

Last edited by ks-waterbug; 09-14-2009 at 08:39 AM.
  #9  
Old 09-14-2009 | 08:17 AM
mainshaft's Avatar
mainshaft
Road Warrior
Joined: Oct 2008
Posts: 1,536
Likes: 0
From: Virginia
Default

Yip, I borrowed my neighbors clearview 9.5 dark recurve, when I got off the bike I went on line and ordered one for me, It should ship this week.
 
  #10  
Old 09-14-2009 | 08:30 AM
Cooper08's Avatar
Cooper08
Advanced
Joined: Jul 2009
Posts: 56
Likes: 0
From: South Carolina
Default

A friend of mine has the Clearview tinted with upper recurve and it is very nice. To tall for me though. I use the 9 1/2 lightly tinted.
 


Quick Reply: Windshield advice for my 08 Ultra



All times are GMT -5. The time now is 01:35 AM.